Description
The Recover Tactical BC2-04 turns a rail-less Beretta 92 or M9 into a light-ready pistol without cutting, drilling, or a trip to the gunsmith. It works by clamping a two-piece polymer shell around the frame using your existing grip screws plus the supplied hardware, giving you a full-length Picatinny rail under the barrel where there wasn't one before. The whole job takes a few minutes with the included hex key, and nothing about it is permanent, so you can pull it back off whenever you want.
What the BC2-04 Adds to Your Beretta
This is the Phantom Grey version, molded from the same glass-reinforced polymer that a lot of manufacturers use for polymer pistol frames. The rail runs MIL-STD-1913 spec, so any standard weapon light or laser will clamp right on. The dustcover section backs up the rail and the trigger guard housing is built to take a beating, which is why the setup holds zero with a laser and shrugs off recoil from normal range and duty use. It also weighs next to nothing, sitting right around two ounces.
Fitment for the 92 and M9 Family
The BC2-04 covers a wide swath of the lineup, including the 92F, 92G, 92D, 92DS, 92FS, 96, Brigadier, Centurion, and M9. The one exception is the 92S, which it will not fit. The grip panels themselves aren't any thicker than stock, so the gun keeps its familiar Beretta feel while gaining the rail out front.
A Few Things Worth Knowing
Because the rail adds bulk to the nose of the pistol, most standard 92/M9 holsters won't clear it, so plan on a light-bearing or open-front holster if you carry. Folks who run a weapon light on this thing tend to be the happiest with it. It's a smart, budget-friendly way to get a light on a nightstand or range Beretta that never came with a rail from the factory.
Key Specifications
- Manufacturer: Recover Tactical (Recover Innovations)
- Manufacturer Part Number: BC2-04
- Model: BC2
- UPC: 7290017108230
- Color: Phantom Grey
- Material: Glass-reinforced polymer
- Rail Type: MIL-STD-1913 Picatinny
- Fitment: Beretta 92F, 92G, 92D, 92DS, 92FS, 96, Brigadier, Centurion, M9
- Does Not Fit: Beretta 92S
- Weight: Approx. 2.1 oz (60g)
- Installation: No gunsmith, no permanent modification
- Country of Origin: Israel
What’s Included
- BC2 two-piece grip and rail shell (Phantom Grey)
- Mounting hardware for trigger guard and rail area
- Hex key
Frequently Asked Questions
Will the BC2-04 fit my Beretta?
It fits most of the full-size 92 family, including the 92F, 92G, 92D, 92DS, 92FS, 96, Brigadier, Centurion, and the M9. The one model it will not fit is the 92S. If you have a full-size 92, 96, M9, or Centurion, you're in good shape.
Do I need a gunsmith to install the BC2-04?
No. You remove your factory grip panels and clamp the two-piece shell around the frame using your existing grip screws plus the supplied hardware and hex key. Most people have it on in a few minutes, and there are no permanent changes to the pistol.
Is the rail strong enough for a light or laser?
Yes. The rail is backed by the dustcover section and holds zero with a laser mounted, and it easily handles a weapon light through normal firing. It's molded from the same glass-reinforced polymer used in many polymer pistol frames, so it holds up well.
Will my Beretta still fit its holster with the BC2 installed?
Probably not a standard 92 or M9 holster. The rail and trigger guard add bulk up front, so most factory-shaped holsters won't clear it. Plan on a light-bearing or open-front holster if you carry the gun with this installed.





Reviews
There are no reviews yet.