Description
The Recover BC2-02 turns a classic Beretta 92 or M9 into a light-ready sidearm without cutting, drilling, or sending anything off to a shop. It clamps over both sides of the frame using your pistol's existing grip screws, replacing the factory panels with a one-piece polymer shell that carries a full-length MIL-STD-1913 Picatinny rail under the dust cover. The tan finish gives your Beretta a fresh, modern look that pairs nicely with FDE or two-tone builds.
What the BC2-02 Grip & Rail System Fits
This one covers most of the full-size Beretta 92 lineup, including the 92F, 92G, 92D, 92DS, 92FS, 96, Brigadier, Centurion, and the military M9. The one model it does not work with is the older 92S, so double-check your variant before ordering. It's built for 9mm and .40 S&W guns in that family, and the Italian-made 92FS fitment issues from years back have since been sorted out.
Installing the Tan BC2-02 Rail System
Install is about as simple as it gets. You pull your old grip panels, seat the two halves of the BC2 over the frame, and snug down six screws. Most folks have it done in under three minutes with nothing more than a screwdriver. The system is field strip compatible, so you can still break the pistol down for cleaning without removing it. Worth noting: the current grip screws on your pistol are used for the install, and they are not included in the box.
Build and Real-World Use
Made from high-grade, glass-reinforced polymer, the BC2-02 weighs right around 60 grams, so it adds almost nothing to the gun. The reshaped grip fills the hand a touch more, especially at the front strap, without making the pistol feel any wider. It also shrouds the external trigger bar and part of the slide lock lever, which are known dust-catchers on the 92 platform. The rail is plenty solid for running a weapon light, and the whole thing is backed by a lifetime warranty from Recover Tactical.
Key Specifications
- Manufacturer: Recover Innovations / Recover Tactical
- Manufacturer Part Number: BC2-02
- UPC: 7290016552119
- Color: Tan
- Material: Glass-reinforced polymer
- Rail Type: Full-length MIL-STD-1913 Picatinny
- Weight: Approximately 60g (2.1 oz)
- Compatibility: Beretta 92F, 92G, 92D, 92DS, 92FS, 96, Brigadier, Centurion, M9
- Not Compatible: Beretta 92S
- Installation: Under 3 minutes, no gunsmith required
- Field Strip Compatible: Yes
- Warranty: Lifetime
- Country of Origin: Israel
What’s Included
- Recover BC2-02 two-piece grip and rail shell (tan)
- Installation hardware
Frequently Asked Questions
Will the BC2-02 fit my Beretta?
It fits most full-size Beretta 92 series pistols, including the 92F, 92G, 92D, 92DS, 92FS, 96, Brigadier, Centurion, and the M9. The one exception is the older 92S, which it will not work with. It's made specifically for the Beretta 92/M9/96 family and won't fit other brands like Taurus.
Do I need a gunsmith to install the tan BC2-02?
No gunsmith needed. You remove your factory grip panels, clamp the two halves over the frame, and tighten six screws, which most people knock out in under three minutes with a screwdriver. It clamps on with no drilling or permanent changes to the pistol.
Is the rail sturdy enough for a weapon light?
Yes. The glass-reinforced polymer rail holds up well to mounting a light and handles the forces of firing without trouble. It's the same type of polymer many manufacturers use for pistol frames, so it's plenty rugged for a duty or home-defense setup.
Does the BC2-02 make the grip thicker?
Not really. The shell is no thicker than the factory Beretta grip panels, though it does reshape the contour a bit, especially around the front strap. The result is a fuller feel in the hand without the pistol actually getting wider.





Reviews
There are no reviews yet.