Description
The True Precision Micro Compensator S-Type packs a lot of recoil control into a footprint smaller than your gun's slide. It was built specifically for True Precision barrels, but the 1/2×28 thread pattern means it plays nice with most 9mm and .380 ACP pistols wearing the same threads. That makes it a easy add-on for carry guns, range toys, and everything in between.
The work happens through a multi-port setup. Three slotted 90-degree ports paired with a tapered front crown push gas up and away from the muzzle, which knocks down felt recoil and keeps the sights flatter between shots. For a comp this size, the difference you feel on rapid strings is genuinely worth the real estate it takes up.
What Makes the S-Type Micro Comp Different
The S-Type wears an angled port pattern that gives it a slightly different look and gas signature than its Y-Type sibling. Both do the same job, so a lot of it comes down to which style matches the vibe of your build. Overall length sits right around .787 inches and it tips the scale near half an ounce, so you're barely adding weight or length to the front of the gun.
Installing the Micro Compensator S-Type
Setup is refreshingly simple. A tension lock O-ring lets you get a secure, hand-tight fit that resists backing off during shooting, and if you want something more permanent you can reach for a medium-strength thread locker. Keep in mind that adding a comp changes how gas cycles through your pistol, so some guns may want a lighter recoil spring or a little tuning to run reliably.
Machined from solid stainless steel bar stock and finished in-house, the Micro Comp comes in a whole lineup of True Precision coatings. That means you can match it to your barrel and slide for a build that looks like it left the factory together. It carries a limited lifetime warranty against defects, which tells you plenty about how the folks in the shop feel about it.
Key Specifications
- Manufacturer: True Precision
- Model: Micro Compensator S-Type
- Manufacturer Part Number: TPSMICROS
- UPC: 719104540724
- Caliber: 9mm / .380 ACP
- Thread Pattern: 1/2"x28
- Port Design: Three slotted 90-degree ports with tapered front crown
- Material: Stainless steel bar stock
- Finish: Spectrum (Rainbow PVD)
- Overall Length: 0.787 in
- Outside Diameter (widest): 0.745 in
- Weight: Approx. 0.56 oz
- Retention: Tension lock O-ring
- Country of Origin: Made in USA
- Warranty: Limited lifetime
What’s Included
- True Precision Micro Compensator S-Type
- Tension lock O-ring (installed)
Frequently Asked Questions
Will the Micro Compensator S-Type fit my pistol?
It works with most 9mm and .380 ACP pistols that have a 1/2×28 threaded barrel. True Precision designed it around their own barrels, so if you're already running one of those you're golden. Just confirm your barrel threads match before ordering.
Do I need a gunsmith to install the S-Type Micro Comp?
For a lot of folks, no. The tension lock O-ring lets you thread it on hand-tight and it holds without backing off, and you can add a medium-strength thread locker if you want it more permanent. That said, having an armorer check the fit and function never hurts, especially on carry guns.
What's the difference between the S-Type and Y-Type Micro Compensator?
Both use a three-port, tapered-crown design to cut felt recoil and muzzle rise, so performance is very close. The main difference is the port pattern and overall look. Pick whichever style matches the aesthetic of your build.
Will adding this compensator affect how my pistol cycles?
It can. A comp changes how gas behaves at the muzzle, which sometimes means a gun runs a little differently. If you notice cycling issues, a lighter recoil spring or some tuning usually sorts it out, and running quality ammo helps too.




Reviews
There are no reviews yet.