Description
These are the little squares that do most of the work when you clean a small-bore rifle or airgun, and Pro-Shot has been making them since 1982. Cut to 0.75" square, they're sized for .17 caliber, .177 airgun, and .22 rimfire barrels, which is the fit range where a lot of folks end up fighting patches that are either too loose to grab anything or so tight they feel like they'll bend a rod. This size threads onto a small jag and moves through a rimfire bore with steady contact and no drama.
What Sets These Pro-Shot Patches Apart
Every patch is 100% American-grown cotton flannel, woven tight and napped on both sides. That double-sided finish is the whole point: instead of one working face, you get grip and absorbency no matter which way the patch lands on the jag. A wet one carries solvent evenly, and a dry one lifts carbon, lead, and leftover fouling without scrubbing hard against your rifling. Over time that gentle contact is what keeps a barrel shooting consistent groups.
Putting the .17/.22 Patches to Work
Most people run these on a pierce-style or spear-tip jag, and the 0.75" square drops right onto the point. A common routine is a couple of wet patches to spread solvent, a short soak, then dry patches run through until they come out clean. Pair them with a bore guide and you're keeping the rod centered and off the crown. If your particular jag runs a hair tight, offsetting the patch slightly on the point smooths the pass.
Why 500 Patches Makes Sense
Patches are a consumable, plain and simple. You go through a small stack every session, and running out mid-clean is a headache. A 500-count bag means you're set for a long time whether you shoot a .22 plinker every weekend or keep an air rifle and a couple rimfires in the safe. The resealable bag keeps them clean and dry on the shelf between uses.
Key Specifications
- Manufacturer: Pro-Shot
- Manufacturer Part Number: 34500
- UPC: 709779500017
- Caliber Range: .17 Cal / .177 Airgun / .22 Rimfire
- Patch Size: 0.75" Square
- Material: 100% Cotton Flannel, Finished Both Sides
- Shape: Square
- Quantity: 500 Per Pack
- Product Type: Cleaning Patches
- Country of Origin: United States
What’s Included
- 500 Pro-Shot 0.75" cotton flannel cleaning patches in a resealable bag
Frequently Asked Questions
Will these Pro-Shot patches fit my .22 rimfire barrel?
Yes, the 0.75" square size is made for .17 caliber, .177 airgun, and .22 rimfire bores. Getting the right fit is really about matching patch size to your jag, so if it runs slightly tight you can offset the patch on the jag point or drop down a jag size. Most small rimfire jags take this size cleanly.
What's the point of finishing the flannel on both sides?
A double-sided nap means the patch grabs fouling and holds solvent no matter which face contacts the bore. You get consistent cleaning without having to worry about which way the patch sits on the jag. It also helps the patch move through the barrel with even pressure instead of dragging.
How many patches will I go through per cleaning?
It varies with how dirty the bore is, but a typical rimfire session might run a couple of wet patches followed by several dry ones until they come out clean. Figure a small handful each time. With 500 in the bag, one pack lasts a long stretch of range trips.
Can I use these with any bore solvent or CLP?
Cotton flannel works well with common solvents, oils, and CLP products, so you can run them wet to spread cleaner and dry to finish. They're a good all-around patch for routine bore maintenance. Just pair them with a properly sized jag and, ideally, a bore guide.




Reviews
There are no reviews yet.