0
0

Strike Industries TRIBUS Enhanced Castle Nut & End Plate – Blue

UPC: 708747548617

$59.95

14 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Strike Industries TRIBUS Enhanced Castle Nut & End Plate takes the plain mil-spec hardware sitting at the back of your AR buffer tube and turns it into one of the more thoughtful upgrades you can bolt on. Instead of a single flush QD socket, you get three quick-detach mounting points spread across the center, left, and right of the extended end plate, so lefties, righties, and anyone who likes to swap sling setups are all covered. The blue hardcoat anodized finish looks sharp against a black or FDE build and holds up to handling.

What the TRIBUS End Plate Does Differently

The extended shape isn't just for looks. Pushing the QD sockets rearward moves the sling attachment away from the webbing of your firing hand, which cuts down on that pinch you get with a standard flat end plate when you're running the gun in tight spaces or under stress. It's a small change you notice fast once your support hand isn't fighting a sling swivel every time you shoulder the rifle. The end plate also has a groove machined in to make dropping the takedown pin detent and spring back in far less of a headache during install.

Anti-Rotation Castle Nut That Skips the Staking

The steel castle nut is lengthened to match the end plate, so it grips more of the receiver extension threads. The standout feature is the anti-walk set screw. Once the nut is torqued, you thread the set screw down and it holds everything put without staking or peening, meaning you can still break it down later for another upgrade without wrecking parts. Builders consistently note it goes on easy and stays snug once tightened, and it works on both AR-15 and AR-308 pattern lowers.

One thing worth knowing going in: because the castle nut and end plate are longer than standard, most stocks lose their fully collapsed first position to make room for the QD socket. Keep torque at or below 35 ft-lbs and you're good to go.

Key Specifications

  • Manufacturer: Strike Industries
  • Manufacturer Part Number: ARTRIBUSBLU
  • UPC: 708747548617
  • Color: Blue
  • Castle Nut Material: Steel
  • End Plate Material: Aluminum
  • Castle Nut Finish: QPQ
  • End Plate Finish: Hardcoat Anodized
  • QD Mounting Points: 3 (Center, Left, Right)
  • Retention: Anti-Walk Set Screw (no staking required)
  • Compatibility: AR-15 / AR-308 (DPMS/ArmaLite pattern)
  • Minimum Thread Length Required: 30mm (1.18 in) on receiver extension
  • Max Castle Nut Torque: 35 ft-lbs (47.45 Nm)
  • Weight: Approx. 2.2 oz

What’s Included

  • 1x TRIBUS Extended Castle Nut (Blue)
  • 1x TRIBUS Extended End Plate (Blue)
  • 2x M3x12mm set screws
  • 1x 1.5mm hex key
  • 1x Warning card

Frequently Asked Questions

Does the TRIBUS castle nut and end plate work on both AR-15 and AR-308 rifles?

Yes, the TRIBUS fits standard mil-spec AR-15 lowers as well as AR-308/DPMS and ArmaLite pattern lowers. Your receiver extension needs at least 30mm (1.18 inches) of thread length for proper installation. It's a popular pick on both platforms.

Do I still need to stake the castle nut with the TRIBUS?

No, that's one of the main selling points. Once the castle nut is torqued, you thread the included anti-walk set screw down to lock it in place, which replaces the need for staking or peening. That means you can still take it apart down the road for another upgrade without ruining any parts.

Will my stock still fully collapse with the extended end plate installed?

Most stocks will lose their fully collapsed first position because the extended castle nut and end plate are longer than standard hardware. This is by design to create clearance for the rear QD socket. You keep every other position, and most users find it a fair trade for the added sling flexibility.

How many sling attachment points does the TRIBUS end plate have?

The TRIBUS end plate gives you three QD sling swivel sockets located at the center, left, and right. This makes it fully ambidextrous, so it works the same whether you shoot right or left handed. The rear placement also helps keep the sling from pinching your firing hand.

Additional information

UPC

708747548617

Manufacturer

Manufacturer Part Number

ARTRIBUSBLU

Reviews

There are no reviews yet.

Be the first to review “Strike Industries TRIBUS Enhanced Castle Nut & End Plate – Blue”