0
0

Strike Industries ARCHEL308BK Extended Latch Charging Handle for AR-10

UPC: 708747543988

$59.95

97 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A charging handle is one of those parts you don't think much about until it lets you down. The Strike Industries ARCH-EL fixes the most common gripe with factory AR-10 handles: that small, hard-to-reach latch. Machined from forged 7075 T-6 aluminum and finished in hard black anodize, this handle swaps in an oversized latch that gives you a positive grip whether you're bare-handed at the bench or fumbling with gloves in the cold.

What the ARCH-EL Latch Buys You

That enlarged latch surface is the whole point. When you're running your rifle with a scope mounted far back over the upper, or you're wearing gloves in snow, mud, or rain, a standard latch can be tough to get a solid hold on. The extended aluminum latch on the ARCH-EL gives you more real estate to work with, so you get a confident pull every time instead of pinching at a tiny tab. It's a small change that makes a real difference when speed matters, whether that's on the clock at a match or just clearing a stubborn round.

Built to Take a Beating

Strike went with forged 7075 T-6 aluminum here, which is the good stuff for this kind of part, then hard anodized it for wear and corrosion resistance. The polished contact surface helps the handle cycle smoothly, and the raised rear lip does the gas-busting work of steering hot gases, oil, and grit away from your face when you're running a suppressor or a gas gun that likes to spit. Going aluminum on the latch also means it's easier on your receiver over the long haul than a steel latch would be.

Fitment and Setup

This version is cut specifically for AR-10 and .308-style uppers, so it's a larger footprint than the AR-15 model. Since AR-10 parts aren't always interchangeable between brands, it's worth confirming your rifle uses a standard DPMS-pattern upper before ordering. Worth noting: it is not compatible with DPMS GII rifles. Swapping it in is a quick job with no gunsmithing needed, and at right around 1.9 ounces it won't throw off the balance of your build.

Key Specifications

  • Manufacturer: Strike Industries
  • Manufacturer Part Number: ARCHEL308BK
  • Model: ARCH-EL Extended Latch
  • UPC: 708747543988
  • Platform: AR-10 / .308
  • Material: Forged 7075 T-6 Aluminum
  • Finish: Black Hard Anodized
  • Latch Type: Extended Aluminum Latch
  • Weight: 1.9 oz
  • Color: Black
  • Not Compatible: DPMS GII rifles

What’s Included

  • 1 x Strike Industries ARCH-EL Extended Latch Charging Handle

Frequently Asked Questions

Will the ARCHEL308BK fit my AR-10?

This handle is made for standard DPMS-pattern AR-10 and .308-style uppers. Because AR-10 dimensions can vary between manufacturers, it's smart to double-check your rifle's pattern before ordering. Note that it is not compatible with DPMS GII rifles.

Do I need a gunsmith to install this charging handle?

No, installation is a simple drop-in job. You remove your old charging handle and slide the ARCH-EL into place, no tools or fitting required. Most people have it swapped in a couple of minutes.

Why choose an extended latch over a standard one?

The larger latch gives you a much easier grab, especially with gloves, cold hands, or a scope mounted low and far back over the receiver. That translates to faster, more reliable charging when you don't have time to fumble. It's one of the most practical upgrades you can make to an AR-10.

Is the aluminum latch going to hold up?

The latch is made from forged 7075 T-6 aluminum with a hard anodized finish, so it's built to take regular use. Aluminum also tends to be gentler on your receiver over time than a steel latch. For routine care, just keep an eye on the latch face and roll pin like you would any charging handle.

Additional information

UPC

708747543988

Manufacturer

Manufacturer Part Number

ARCHEL308BK

Model

Reviews

There are no reviews yet.

Be the first to review “Strike Industries ARCHEL308BK Extended Latch Charging Handle for AR-10”