Description
The Springfield Armory XD-S Backstrap Sleeve for .45 ACP solves a real problem that comes up when you want to run the narrower Backstrap 1 on your XD-S. When you load a full-size magazine in the gun, there's going to be a noticeable gap between where the magazine ends and where your grip frame begins. This sleeve slides over the magazine to bridge that gap and give you a continuous grip surface from frame to magazine base.
What This Sleeve Actually Does
It's a one-piece polymer extension that matches your pistol's grip contour and the Flat Dark Earth finish of your .45 ACP model. The sleeve is engineered to work specifically with Backstrap 1 on XD-S .45 configurations. Installation is straightforward—just slide it onto your magazine and you're done. The design is low-profile enough that it won't interfere with holstering or carry, and it weighs almost nothing.
Build and Durability
Springfield uses durable polymer material for this sleeve, meaning it will hold up to regular carry and use without wearing through. The finish is matte, so it blends in naturally with your frame and magazine. There are no moving parts or anything that can fail, which is why this is a solid add-on to your gun.
Compatibility with Your XD-S Setup
This is specifically engineered for the XD-S .45 ACP with the number 1 backstrap. If you switch backstraps or run a different size configuration, you'll need the corresponding sleeve for that setup. It fits all XD-S .45 configurations with the 3.3 to 4.0 inch barrels. The sleeve works with both the compact and full-size magazine options, giving you a more complete grip either way.
Key Specifications
- Manufacturer: Springfield Armory
- Manufacturer Part Number: XDS5001FDE
- UPC: 706397904173
- Caliber: .45 ACP
- Model Compatibility: Springfield Armory XD-S
- Backstrap Size: #1 (Narrow)
- Barrel Length Compatibility: 3.3 to 4.0 inches
- Material: Polymer
- Finish: Flat Dark Earth (FDE)
- Design Type: Magazine extension sleeve
What’s Included
- Springfield Armory XD-S Backstrap Sleeve #1 FDE
Frequently Asked Questions
Will this backstrap sleeve fit my XD-S with the #2 backstrap installed?
No. This is specifically engineered for Backstrap 1 only. Each sleeve is contoured to match the specific grip profile of its corresponding backstrap. If you're running Backstrap 2, you need the #2 backstrap sleeve instead. The two are not interchangeable.
Does this sleeve increase magazine capacity?
No. The sleeve doesn't add any ammunition capacity to your magazine. It's purely for ergonomics and grip control. Its job is to fill the visual and tactile gap between the magazine base and your grip frame when using a full-size magazine with the narrower backstrap configuration.
Can I use this sleeve on both the compact and full-size XD-S magazines?
Yes. This sleeve is designed to work with any XD-S .45 ACP magazine when you have Backstrap 1 installed. Whether you're running the shorter or longer magazine, the sleeve will bridge the gap between the magazine base and your grip. Just make sure your barrel length is between 3.3 and 4.0 inches for proper fit.
Is this sleeve a factory Springfield part?
Yes. This is an OEM Springfield Armory part, not an aftermarket accessory. It's engineered to the same tolerances and specifications as your firearm, so fit and function match exactly. Using factory parts ensures compatibility and reliability with your specific pistol configuration.




Reviews
There are no reviews yet.