Description
When it comes to 1911 magazines, there's something to be said for going straight to the source. The Springfield Armory PI6085 is a factory OEM magazine built to the exact same specifications and materials as the original magazines that ship with Springfield's full-size .45 ACP 1911s. That means you're getting a known-good fit with no guesswork about compatibility or feed geometry.
The body is stainless steel, which holds up well to sweat, humidity, and range bag abuse compared to a blued mag. Inside, you get a steel wire spring and a flat steel follower that work together to keep rounds properly aligned and feeding consistently. Witness holes on the body let you do a fast visual round count without dropping the mag, which is a small but genuinely useful detail at the range or on the clock.
The slam pad at the base is a polymer bumper that sticks out just enough to give your palm something to push against when you need to make sure the mag is fully seated. It also offers a bit of protection if you drop the mag on a hard surface during a reload. The overall dimensions are listed at approximately 6.5 inches tall by 3.8 inches wide by 1.1 inches thick, and the whole package comes in at about 0.16 lbs, so it sits light in a mag pouch or on a belt.
This magazine fits Springfield Armory full-size and Champion 1911 models chambered in .45 ACP, including the Garrison, TRP, Loaded, Mil-Spec, and Operator lines. It has also been reported to function in other standard Government and Commander frame 1911s from various manufacturers, though Springfield builds it specifically for their platform. Note that this is not compatible with the EMP, which uses a different, shorter frame and caliber-specific magazine. If you run a full-size Springfield .45, this is a clean, no-drama backup mag worth keeping on hand.
Key Specifications
- Manufacturer: Springfield Armory
- MPN: PI6085
- UPC: 706397660857
- Caliber: .45 ACP
- Capacity: 7 Rounds
- Body Material: Stainless Steel
- Spring Material: Steel Wire
- Follower: Flat Steel
- Base Pad: Polymer Slam Pad
- Finish: Stainless (Natural)
- Style: Detachable Single Stack
- Approx. Height: 6.5 in.
- Approx. Width: 3.8 in.
- Approx. Depth: 1.1 in.
- Weight: 0.16 lbs
- Model Fit: Springfield Armory 1911 Full-Size / Champion (.45 ACP)
What’s Included
- 1x Springfield Armory 1911 .45 ACP 7-Round Stainless Steel Magazine with Slam Pad
Frequently Asked Questions
Which Springfield Armory 1911 models does the PI6085 magazine fit?
This magazine is designed for Springfield Armory full-size and Champion 1911 models chambered in .45 ACP, including the Garrison, Mil-Spec, Loaded, Operator, and TRP. It fits Government-length (5-inch) and Commander-length (4.25-inch) frames that are chambered in .45 ACP. Always verify your specific model and caliber before ordering, as 1911 magazines are both caliber-specific and frame-size-specific.
Will this magazine work in the Springfield Armory EMP?
No. The EMP uses a completely different, shorter frame that was purpose-built around the 9mm cartridge, and it requires EMP-specific magazines. Standard full-size 1911 .45 ACP magazines like the PI6085 are not compatible with the EMP. Make sure you are ordering a magazine matched to both the caliber and the frame size of your specific pistol.
Can this Springfield 1911 magazine be used in other brands of 1911 pistols?
Springfield builds this magazine to fit their own platform, but many Government and Commander frame 1911s from other manufacturers will accept standard single-stack .45 ACP magazines of this type. It has been reported to function in Rock Island Armory and Colt full-size 1911 pistols, among others. That said, fit can vary across manufacturers, so confirming compatibility with your specific pistol before relying on it is always a smart move.
What is the slam pad on this magazine and why does it matter?
The slam pad is a polymer bumper on the base of the magazine that extends slightly beyond the body. It gives you a solid surface to firmly seat the magazine with your palm, especially useful when reloading under pressure or in less-than-ideal conditions. It also cushions the magazine body if you drop it on a hard floor during a reload, which helps protect both the mag and the feed lips.
Is the PI6085 a factory original magazine or an aftermarket product?
This is a genuine factory OEM magazine made by Springfield Armory to the same specifications and materials as the magazines that ship with their full-size .45 ACP 1911 pistols. In fact, the PI6085 is the same magazine number that Springfield includes with several of their TRP pistols from the factory. You are getting the real thing, not a third-party substitute.
Does this magazine come disassembled or can the base pad be removed?
The base pad on the PI6085 is a fixed polymer slam pad and is not designed to be easily disassembled in the same way as some aftermarket magazines with removable base plates. For routine cleaning, the magazine can be wiped down and flushed out without full disassembly. Some owners run a spray cleaner through the follower to keep things moving freely without needing to remove the base pad.





Reviews
There are no reviews yet.