0
0

Bore Tech Rimfire Blend 4 oz Bore Cleaner for .22 Rifles & Pistols

UPC: 667739170048

$19.99

52 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Rimfire ammo is a different animal than centerfire. The lower heat and waxy bullet lube leave behind a stubborn mix of lead, carbon, and bullet wax that a general-purpose solvent just doesn't tackle the same way. That's exactly why Bore Tech built Rimfire Blend. It uses an exclusive combination of surfactants, penetrants, and releasing agents that soak into the fouling and lift it off the barrel walls, so the chemistry does most of the work instead of your elbow.

What folks notice first is how little effort it takes. Wet a few patches, run them through, make some passes with a brush, then let it soak five to ten minutes and patch dry. A lot of rimfire guys who put a couple hundred rounds through a CZ or Ruger over a month find the crud comes out with a minimal soak and a handful of patches. It's ammonia-free with barely any odor, biodegradable, and 100% barrel safe on smallbore rifling, which makes it easy to use on the bench without stinking up the room.

Where Rimfire Blend Earns Its Spot

This one has a following in the precision and competition crowd for good reason. It's become a go-to for smallbore match shooters and even rifle manufacturers, and it plays nice with everything from a bolt-action target rifle to a plinking .22 pistol. It handles the lead and powder residue from standard-velocity match ammo, and shooters running .22 Mag and .17 HMR report good results on those too.

Getting the Most Out of Your 4 oz Bottle

A little goes a long way, so this 4 oz bottle lasts a good while for routine maintenance. The treated HDPE bottle with a twist-dispensing cap fits neatly in a range bag. One tip from experienced users: after you patch dry, follow up with a light coat of quality oil or a rust preventative in the bore, since a squeaky-clean barrel needs that protective film before storage.

Key Specifications

  • Manufacturer: Bore Tech
  • Manufacturer Part Number: BTCF17004
  • UPC: 667739170048
  • Size: 4 oz
  • Type: Rimfire bore cleaner / solvent
  • Removes: Lead, carbon, powder fouling, bullet wax
  • Formula: Ammonia-free, low odor, biodegradable
  • Barrel Safe: Yes, 100% safe on smallbore rifling
  • Bottle Material: Treated HDPE with twist-dispensing cap
  • Country of Origin: United States

What’s Included

  • One 4 oz bottle of Bore Tech Rimfire Blend Bore Cleaner

Frequently Asked Questions

What makes Rimfire Blend different from a regular bore cleaner?

Rimfire ammo runs cooler than centerfire and uses waxed lead bullets, so it leaves behind a different mix of lead, wax, and powder residue. Bore Tech built Rimfire Blend specifically to cut through that combination in one pass. General-purpose or copper-focused solvents aren't tuned for the lead and bullet lube you get from .22 ammo, which is why smallbore shooters reach for this instead.

Can I use Rimfire Blend on my .22 Mag or .17 HMR?

Yes. While it shines on standard .22 LR lead fouling, shooters report good results using it on .22 Mag and .17 HMR barrels for powder and carbon buildup. Those cartridges use jacketed bullets, so if you run into heavier copper fouling you may want to pair it with a dedicated copper remover.

How do I use Bore Tech Rimfire Blend?

Wet three or four patches and push them through the bore in one direction to clear loose fouling. Make ten to fifteen passes with a saturated brush, run a couple more wet patches, and let it soak five to ten minutes before patching dry. Badly fouled barrels may need a longer soak.

Should I oil the barrel after cleaning with Rimfire Blend?

It's a good idea. Once you've patched the bore squeaky clean, that bare surface has no protection, so follow up with a light coat of quality oil or a rust preventative before storing the rifle. This is especially important if the gun is going to sit for a while.

Additional information

UPC

667739170048

Manufacturer

Manufacturer Part Number

BTCF17004

Reviews

There are no reviews yet.

Be the first to review “Bore Tech Rimfire Blend 4 oz Bore Cleaner for .22 Rifles & Pistols”