0
0

XS Sights R3D 2.0 Green Night Sights for Springfield SA-35

UPC: 647533004251

$128.12

11 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The R3D 2.0 is XS Sights' second-generation night sight set machined specifically for the Springfield Armory SA-35, the modern take on the classic Browning Hi-Power. It runs a traditional 3-dot notch-and-post layout, but the real story is the front sight. That green Glow Dot measures a wide 0.145 inches across and wraps a Swiss-made tritium lamp, so it soaks up ambient light during the day and stays lit when the sun goes down. The rear notch opens up to 0.170 inches, giving you plenty of daylight on either side of the post for quick, clean alignment.

What Sets the R3D 2.0 Apart From the Original

XS took the first-gen R3D and made it brighter and tougher. The two rear tritium dots are bigger than before, and each one gets a black PVC ring around it to sharpen the edge and keep the rear from outshining the front. That's intentional. The front is meant to glow a touch brighter so your eye naturally locks onto it, and the blacked-out, serrated rear cuts glare and pushes your focus downrange. It's a defensive setup through and through, whether the SA-35 lives on your nightstand or rides in a holster.

Durability and the EasyPress Install

These are CNC machined from steel bar stock in Texas, then given a BlackNitride finish that shrugs off corrosion and wear far better than the old black oxide treatment. The other big upgrade is installation. The EasyPress dovetail design uses a lead-in edge and a built-in crush zone that cuts the force needed to seat the sights by about half, with no filing or heavy hammering required. A sight pusher makes it painless, though a punch and a steady hand will get it done too.

Built for the SA-35 Shooter

If you've been running the flat factory sights on your SA-35 and struggling to pick them up in low light, this is the fix. Tritium front and rear means you always have a reference, and the wide, high-contrast front dot is genuinely easy to find fast. Owners consistently note how much brighter these are than typical factory night sights and how simple the install turned out to be.

Key Specifications

  • Manufacturer: XS Sights
  • Model: R3D 2.0
  • Manufacturer Part Number: SP-R202P-6G
  • UPC: 647533004251
  • Fitment: Springfield Armory SA-35
  • Sight Type: Tritium Night Sights, Standard Height
  • Front Color: Green Glow Dot with tritium lamp
  • Illumination: Tritium front and rear, dual-illuminated photoluminescent front
  • Front Sight Width: 0.145 in
  • Rear Notch Width: 0.170 in
  • Front Sight Height: 0.275 in
  • Rear Sight Height: 0.325 in
  • Material: CNC-machined steel bar stock
  • Finish: BlackNitride
  • Country of Origin: United States

What’s Included

  • Front sight
  • Rear sight
  • Red threadlocker
  • Hex wrench
  • Installation instructions

Frequently Asked Questions

Do the R3D 2.0 sights fit the Springfield SA-35 without modification?

Yes. This set is cut specifically for the SA-35 dovetails, so no filing or slide machining is needed. The EasyPress design uses a lead-in edge and crush zone that lets the sight press over a third of the way in before full contact, then seats the rest of the way with far less force.

How long does the tritium last on the R3D 2.0?

The tritium lamps use Swiss-made vials rated to glow for roughly 12 years. On top of that, the front Glow Dot is photoluminescent, meaning it charges off ambient light and glows in low light alongside the tritium, so you get a bright front reference day or night.

Can I install these R3D 2.0 sights myself?

Plenty of owners do. A sight pusher makes it the smoothest, but the redesigned dovetail cuts the required force by about half and eliminates the filing and heavy hammering the older R3D sometimes needed. Red threadlocker and a hex wrench come in the box for the front sight, and XS provides written install instructions.

What makes the front sight brighter than the rear on the R3D 2.0?

That's by design. The front uses a wide 0.145-inch dual-illuminated Glow Dot over a tritium lamp, while the two rear dots are smaller and slightly dimmer with black PVC rings around them. Keeping the rear subdued and blacked out pulls your eye to the front sight for faster, more accurate indexing.

Additional information

UPC

647533004251

Manufacturer

Manufacturer Part Number

SPR202P6G

Color

Black

Model

Reviews

There are no reviews yet.

Be the first to review “XS Sights R3D 2.0 Green Night Sights for Springfield SA-35”