$68.89
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The XS Sights Big Dot puts an oversized, high-contrast aiming point right where your eye wants to go. Built for the Smith & Wesson J-Frame with a pinned front sight and the Ruger SP101 with a fixed rear, it swaps out that hard-to-see factory blade for a green tritium lamp wrapped in a yellow photoluminescent Glow Dot. The dot measures 0.188 inches wide with an overall sight height of 0.205 inches, and the whole thing is CNC-machined from solid steel with a black finish that holds up to real carry use.
Revolver sights, especially on small-frame carry guns, tend to be a thin black blade sitting in a shallow groove. That setup is tough on aging eyes and slow in poor light. The Big Dot flips that around with a "dot the i" sight picture: line the big front dot up in the rear notch and press. It's a fast, intuitive, point-and-shoot method that shines inside typical defensive distances, and folks with tired eyes tend to fall in love with it right away.
The yellow outline is photoluminescent, so it soaks up ambient light and glows on its own before it's dark enough for the tritium to take over. When the lights go out, the green tritium lamp keeps you aimed. The convex shape of the dot adds surface area, which helps it charge faster and stay visible longer. Green is a strong pick for low-light glow intensity, and the yellow ring gives you a bold reference in daylight too.
This is a gunsmith-level install, not a drop-in. The sight body needs a pin hole drilled for installation, and on many J-Frames the existing front sight has to be worked down before the Big Dot goes on. If you're comfortable with a punch, a drill, and taking your time, plenty of owners handle it at home. If not, a gunsmith or XS itself can do it. One thing worth knowing: at closer ranges the dot sits close to point of impact, and past 10 yards or so some shooters lower the dot in the notch to keep rounds on target.
This sight is made for J-Frames that use a pinned front sight, as well as the Ruger SP101 with a fixed rear. It's not a universal drop-in, so it's worth confirming your revolver has a pinned front before ordering. Some older fixed-blade J-Frames need the factory sight worked down first before this one can be fitted.
It's a gunsmith-level job rather than a slide-on swap. The sight body has to be drilled for a retaining pin, and on many J-Frames the original front sight needs to be filed or milled down first. If you're handy with a punch, a drill, and some patience, owners regularly do it at home, but a gunsmith is a solid call if you'd rather not.
The yellow outline is photoluminescent, so it charges off ambient light and glows on its own during that fading dusk window before it's fully dark. Once it's dark, the green tritium lamp keeps you aimed with no charging needed. XS warranties the tritium glow for 12 years.
At closer, real-world defensive distances the dot sits right about at point of impact when you center it in the rear notch. As distance stretches past roughly 10 yards, many shooters drop the dot lower in the V or notch to keep rounds on target. At room distance, any small difference isn't worth sweating over.
| UPC | 647533000604 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | RV0003N3Y |
| Color | FRONT NIGHT SIGHT GREEN |
| Length | 8.1000 |
| Style | Tritium/Glow Dot Front Sight |
You must be logged in to post a review.
Reviews
There are no reviews yet.