Description
The AmeriGlo XD191R is a dedicated rear night sight built to replace the factory rear on your Springfield. It carries two green tritium lamps, each wrapped in a bright white outline, so your rear notch stays visible when the sun goes down and your eyes need every bit of help they can get. Because tritium is self-luminous, there are no batteries to swap and no charging under a flashlight. It just glows, day in and day out, for years.
What Makes the XD191R Worth Bolting On
This one is machined from bar stock steel and assembled with Swiss-made tritium, which is the same recipe AmeriGlo uses across their duty-grade lineup. The rear sits at a .270 inch height with a .165 inch square notch and a #10 dovetail cut. That square notch gives you a clean, defined sight picture that pairs well with a front dot for quick alignment, whether you are punching paper at the range or running low-light drills.
Fitment Notes for the XD191R
The XD191R is designed to fit most SIG Sauer and Springfield Armory models, including XD, XD-M, and XD-S pistols, as well as the Hellcat in non-OSP configuration. If your slide is cut for an optic, this is not the sight you want, so double-check your model before ordering. It is a rear-only piece, which is handy if you already have a front sight you like or you are building a custom pairing to suit your eyes.
A couple of real-world things worth knowing: dovetail sights fit tight by design, and pressing one in usually calls for a sight pusher or a trip to a gunsmith. Do it right and you get a rock-solid, glow-in-the-dark rear that holds zero and disappears into your existing holster. For anyone carrying an XD for defense or just wanting a sharper picture after dark, the XD191R is a straightforward, dependable upgrade.
Key Specifications
- Manufacturer: AmeriGlo
- Manufacturer Part Number: XD191R
- UPC: 644406901525
- Style: Classic
- Sight Type: Tritium Rear Night Sight
- Configuration: 2-Dot Green Tritium
- Outline Color: White
- Tritium Color: Green
- Rear Sight Height: 0.270"
- Notch: .165" Square Notch
- Dovetail Cut: #10
- Material: Machined Steel
- Tritium Source: Swiss-Made
- Fits: Most SIG Sauer and Springfield XD, XD-M, XD-S, Hellcat (non-OSP)
What’s Included
- AmeriGlo XD191R tritium rear night sight (1)
Frequently Asked Questions
Does the XD191R come with a front sight too?
No, the XD191R is a rear sight only. It carries two green tritium lamps with white outlines and is meant to replace your factory rear. If you want a matching front, you would pair it with a compatible AmeriGlo front sight or a full XD set.
Will the XD191R fit my Springfield XD-M or Hellcat?
It is built to fit most Springfield Armory XD, XD-M, and XD-S models, plus the standard Hellcat in non-OSP form, along with many SIG Sauer pistols using the #10 cut. It will not work on optics-ready slides that are milled for a red dot. Always confirm your exact model before installing.
Do tritium sights need batteries or charging?
Neither. Tritium is self-luminous, so the lamps glow on their own around the clock without any light source or power. That glow gradually dims over many years, but you get a long service life of reliable low-light visibility with zero maintenance.
Can I install the XD191R myself?
Dovetail rear sights fit snug and are pressed into place, so the cleanest way is with a proper sight pusher tool. Some folks do it at home with the right gear, but if you are unsure, a gunsmith can knock it out quickly and make sure your zero stays true.





Reviews
There are no reviews yet.