0
0

Hi-Viz S400G Magnetic Shotgun Front Sight, Green Fiber Optic

UPC: 613485584615

$14.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Hi-Viz S400G is part of the S-Series lineup, the most budget-friendly magnetic sight Hi-Viz makes. It's a simple, effective way to swap a dull factory bead for a glowing green fiber optic dot that pulls in ambient light and gives you a much easier reference to track. No tools, no drilling, no permanent changes to your gun. The magnetic base snaps right onto the rib and holds tight using rare-earth magnets, so setup takes about a minute.

What the S400G Fits

This is the wide model, built for ribs measuring .328" to .437" (that's 21/64" to 7/16", or 8.3mm to 11.1mm). It's a common fit for Winchester post-1964 pumps and autoloaders, Mossberg non-ported models, Browning Citori target grades (outside the super-wide ribs), and Beretta trap guns like the S682. Before you order, it's worth measuring your rib width right behind the existing bead so you know you're in range. If your rib runs narrower, the S200 and S300 cover those sizes instead.

Why Green LitePipe Works

The S400G ships with a single green fiber optic LitePipe. Green tends to read brighter for a lot of folks, especially older eyes, and it stands out well against most backgrounds when you're wing shooting or breaking clays. Keep in mind the S-Series pipe is fixed, so what you see is what you get, no swapping colors like you can on the pricier M-Series. That trade-off is exactly what keeps this one affordable.

Real-World Use

Shooters consistently mention how fast it goes on and how much easier it is to find the muzzle in low light. The magnets hold well through normal recoil, though a smart habit some folks use is butting the sight right up against the factory bead so it can't creep under heavy loads. One thing to note: on ported barrels, mount it clear of the port holes since escaping gas near the ports can work it loose over time. On a standard rib it stays put and does its job. Backed by Hi-Viz's limited lifetime warranty, it's a low-cost upgrade that makes a real difference at the range or in the field.

Key Specifications

  • Manufacturer: Hi-Viz
  • Model: S400G (S-Series Wide)
  • Manufacturer Part Number: S400G
  • UPC: 613485584615
  • Color: Green
  • Sight Type: Fiber Optic Front Bead
  • Mounting: Magnetic snap-on base, tool-free
  • Rib Width Fit: .328" to .437" (8.3mm to 11.1mm)
  • LitePipe: Single green, non-interchangeable
  • Frame Material: Polymer with rare-earth magnetic base
  • Warranty: Hi-Viz Limited Lifetime Warranty

What’s Included

  • Hi-Viz S400G magnetic front sight with green LitePipe installed
  • Instruction card

Frequently Asked Questions

Will the S400G fit my shotgun?

The S400G is the wide model and fits ribs from .328" to .437" (8.3mm to 11.1mm). It's commonly used on Winchester post-1964 pumps and autos, non-ported Mossberg models, Browning Citori target grades, and Beretta trap guns. Measure your rib width right behind the existing bead before ordering, and if it runs narrower, look at the S200 or S300 instead.

Does the magnet hold under recoil?

Yes, the base uses strong rare-earth magnets that stay locked on through normal shooting. Many folks add a little insurance by butting the sight up against the factory bead so it physically can't creep. Just avoid mounting it near the ports on a ported barrel, since escaping gas there can eventually work it loose.

Can I change the fiber optic color on the S400G?

No, the S-Series LitePipe is fixed and not interchangeable, so this model comes set with green. That's part of what keeps it the most affordable magnetic sight in the Hi-Viz lineup. If you want swappable colors and multiple pipe options, the M-Series is the one to look at.

Do I need any tools or a gunsmith to install it?

Not at all. The magnetic base snaps right onto your rib in about a minute with no tools, drilling, or permanent changes to the barrel. It's just as easy to pop off if you want to move it to another shotgun or return to your factory bead.

Additional information

UPC

613485584615

Manufacturer

Manufacturer Part Number

S400G

Color

GREEN

Length

6.5500

Product Type

Fiber Optic Bead

Shipping Weight

0.05

Style

Fiber Optic Front Sight

Reviews

There are no reviews yet.

Be the first to review “Hi-Viz S400G Magnetic Shotgun Front Sight, Green Fiber Optic”