Description
Federal Upland Steel has built a solid reputation for hunters who need to shoot non-lead ammunition without sacrificing performance. These 3-inch 410 shells pack 3/8 ounce of #6 steel shot moving at 1400 fps, which generates roughly 714 foot-pounds of muzzle energy and approximately 118 pellets per round.
Federal Upland Steel 410 for Upland Hunting
These shells are purpose-built for doves, quail, grouse, and other light upland game where steel shot is required. The #6 shot size provides an effective balance for birds at typical shooting distances in the field. While steel is less dense than lead, Federal compensates with that higher velocity, ensuring your payload retains enough energy to get the job done cleanly.
What Makes This 410 Load Practical
One reason Federal Upland Steel stands out is the price point paired with reliability. You get consistent velocities shot after shot thanks to their eight-segment crimp design. These shells feed reliably through 410 shotguns and won't leave your barrel fouled up the way some cheaper steel loads can. The 3-inch chamber means you get a bit more pellet count and energy than shorter 2.5-inch shells, without the recoil bump of going to larger gauges.
What to Know About Steel Shot in a 410
Steel shot behaves differently than lead, and that's worth understanding. Steel's lower density means it sheds velocity faster downrange, so your effective range is tighter than with equivalent lead loads. That said, the 1400 fps launch speed helps offset this somewhat, and for typical upland hunting ranges on small game, these shells perform well. They're loaded in brass-plated steel hulls that cycle smoothly and extract cleanly.
Key Specifications
- Gauge: .410 Bore
- Shell Length: 3 inches (76mm)
- Shot Size: #6
- Shot Weight: 3/8 ounce (10.7g)
- Shot Type: Steel (Non-lead)
- Muzzle Velocity: 1400 fps
- Rounds per Box: 25
- Hull Material: Brass-plated steel
- Primer Type: Non-corrosive
- Manufacturer: Federal Ammunition
- MPN: USH4106
- UPC: 604544661309
What’s Included
- 25 rounds of Federal Upland Steel 410 bore 3-inch shells
Frequently Asked Questions
Can I use Federal Upland Steel 410 shells in any 3-inch 410 shotgun?
Yes, these shells are designed for any shotgun or firearm chambered in 3-inch 410 bore. They feed and extract reliably in most quality firearms, and the brass-plated steel hulls help ensure smooth cycling. Just verify your firearm is rated for 3-inch shells, as some older or lighter guns may only handle 2.5-inch loads.
What's the difference between this steel shot load and lead alternatives?
Steel shot is less dense than lead, meaning the pellets shed velocity faster downrange and don't penetrate as deeply. Federal compensates with higher velocity (1400 fps) to help offset these differences. Steel shot is required in certain areas for environmental reasons, and these shells are built to perform effectively within typical upland hunting ranges.
Are Federal Upland Steel 410 shells suitable for teaching new shooters?
The 410 bore is inherently mild on recoil compared to larger gauges, making it a good choice for youth and beginners. These shells at 1400 fps generate manageable recoil while still providing enough power for practice and light hunting applications.
How many pellets are in each Federal Upland Steel 410 shell?
With 3/8 ounce of #6 steel shot, each shell contains approximately 118 pellets. This pellet count provides good pattern potential for upland game at typical hunting distances, though keep in mind steel patterns slightly different than equivalent lead loads.





Reviews
There are no reviews yet.