0
0

Bergara Omni #3 Muzzle Brake .30 Cal .840″ OD 5/8-24 (BA0013)

UPC: 043125000289

$79.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Bergara Omni #3 is a directional muzzle brake made for .30-caliber rifles, and it's the factory-matched piece for the heavier .840" barrel contours. It works by venting gas through angled ports to pull felt recoil down and keep muzzle rise in check, which means your reticle stays closer to the target and follow-up shots come faster. It's threaded 5/8-24, the standard pitch for most .30-cal builds, with a bore sized to clear .30-caliber projectiles cleanly.

What Sets the Omni #3 Apart

Unlike a plain radial brake that dumps gas in every direction, this one is directional. The porting is designed to reduce recoil and hold the muzzle flat without kicking up a big dust signature behind the shot, which is a real advantage when you're prone in the field or spotting your own hits. Folks who've run these consistently point to noticeably reduced recoil and less lift off the bench.

Build and Finish on the Bergara Brake

The body is 416 stainless steel treated with a nitride heat finish, so it holds up to heat, powder, and weather without much fuss. The black nitride also gives it a clean, low-profile look that blends into the barrel rather than sticking out. The .840" outside diameter is the key spec here since it's meant to sit flush against a fuller barrel profile, so double-check your barrel's OD before ordering.

Fitment for Your Rifle

This #3 version is the correct brake for the B14 HMR, B14 BMP, Premier Ridgeback, Premier LRP, and the HMR Pro in 6.5 Creedmoor heavy barrel, among other Bergara models sharing that .840" contour. Because it's directional, it needs to be clocked correctly at install so the ports sit where they should, which usually means timing it with a shim kit or crush washer to land the porting in the right spot. If you're upgrading a bare-muzzle Bergara or replacing a lost brake, this is the drop-in match.

Key Specifications

  • Manufacturer: Bergara
  • Model: Omni #3
  • Manufacturer Part Number: BA0013
  • UPC: 043125000289
  • Type: Directional Muzzle Brake
  • Caliber: .30 Cal
  • Outside Diameter: .840"
  • Bore Diameter: .330"
  • Thread Pattern: 5/8"-24 tpi
  • Material: 416 Stainless Steel
  • Finish: Nitride Heat-Treated (Black)
  • Color: Black
  • Compatibility: B14 HMR, B14 BMP, Premier Ridgeback, Premier LRP

What’s Included

  • Bergara Omni #3 directional muzzle brake

Frequently Asked Questions

Which Bergara rifles does the Omni #3 muzzle brake fit?

The Omni #3 is built for Bergara models with the .840" barrel contour, including the B14 HMR, B14 BMP, Premier Ridgeback, and Premier LRP. It also matches the HMR Pro in 6.5 Creedmoor heavy barrel. The important thing is confirming your barrel's outside diameter and 5/8-24 thread pitch before you order.

Is the Bergara Omni brake directional, and does that affect installation?

Yes, this is a directional brake, so the porting needs to be clocked to the correct position when you install it. That usually means timing it with a shim kit or crush washer so the ports end up where they belong. A properly timed install keeps the recoil reduction working as designed and won't hurt accuracy.

What is the Omni #3 made of and how durable is it?

It's machined from 416 stainless steel and given a nitride heat treatment for the finish. That combination handles the heat and pressure at the muzzle well and adds corrosion resistance for range and field use. The black nitride also gives it a clean, low-profile look on the barrel.

Will this muzzle brake actually reduce recoil and muzzle rise?

The directional port design is meant to pull the muzzle down and cut felt recoil, and users who've run it report noticeable reduction in kick and less lift off the bench. That translates to staying on target through the shot and quicker follow-ups. Keep in mind any brake will make the rifle louder for anyone standing beside you, so ear protection matters.

Additional information

UPC

043125000289

Manufacturer

Manufacturer Part Number

BA0013

Color

MUZZLE BRAKE/BLACK

Length

5.8500

Model

Shipping Weight

0.185

Thread Pattern

5/8"-24 tpi

Reviews

There are no reviews yet.

Be the first to review “Bergara Omni #3 Muzzle Brake .30 Cal .840″ OD 5/8-24 (BA0013)”