Description
Copper fouling is one of those things that sneaks up on you. Your rifle shoots fine for a while, then groups start to spread and you can't figure out why. More often than not, it's a bore packed with copper from all those jacketed bullets. Shooters Choice Copper Remover is built for exactly that problem, using a concentrated extra-strength formula that goes after copper and gilded metal deposits without the endless scrubbing.
This is the maximum-strength stuff, so it's meant for the tough jobs rather than a quick after-range wipe-down. It works on both rifle and pistol bores, and it's especially handy on used or neglected guns where fouling has had time to really build up. Plenty of folks who chase accuracy keep a tin on the bench for that periodic deep clean every few hundred rounds.
Putting the Shooters Choice Copper Remover to Work
Using it is straightforward. Run a couple of solvent-soaked patches through the bore to wet it down and clear loose fouling, then let it sit and do its thing. When your patches come out with that telltale blue-green tint, you know it's pulling copper out of the rifling. A nylon brush works better than bronze here, since the solvent will eat away at brass and copper brushes over time. For a badly fouled barrel, longer soak times get the job done, though it's smart not to leave any strong ammonia-based solvent parked in the bore overnight.
Why This Tin Earns Bench Space
A little goes a long way, and the 4 oz size is plenty for a lot of cleaning sessions before you need another. It's a fast-acting formula that does one job and does it well, which is why it has stuck around as a favorite among precision and bench-rest crowds. Made in the USA, it's the kind of no-nonsense product that just works when you need to reclaim a tired barrel and get back to putting rounds where you want them.
Key Specifications
- Manufacturer: Shooters Choice
- Manufacturer Part Number: SHFCRS04
- UPC: 027784001436
- Volume: 4 oz (118 ml)
- Type: Extra Strength Copper Bore Solvent
- Intended Use: Rifle and Pistol Bores
- Removes: Copper and Gilded Metal Fouling
- Container: Tin
- Country of Origin: Made in the USA
- Shipping Weight: 0.5125 lb
What’s Included
- One 4 oz tin of Shooters Choice Copper Remover
Frequently Asked Questions
How do I know the Shooters Choice Copper Remover is working?
When you run a patch through the bore after letting the solvent soak, look at the color. If it comes out with a blue or green tint, that means it's pulling copper deposits out of the rifling. Keep repeating soak-and-patch until the patches come out clean.
Can I use a bronze or brass brush with this copper solvent?
It's best not to. This is a strong solvent that will chemically attack copper and brass, so a bronze or brass brush will deteriorate and give you false readings. Stick with a nylon brush and keep it dedicated to copper solvent use.
Will Shooters Choice Copper Remover work on pistols too?
Yes, it's formulated for both rifle and pistol bores. Any firearm shooting jacketed ammunition can build up copper fouling, and this solvent handles it the same way across the board.
How long should I let the solvent soak in the bore?
A soak of 15 to 30 minutes handles most jobs, and heavily fouled barrels may need longer. Just avoid leaving strong ammonia-based solvents sitting in the bore overnight to be safe on the barrel steel.



Reviews
There are no reviews yet.