Description
Zeroing a thermal optic used to mean waiting for low light or messing with hand warmers taped to a piece of cardboard. The Allen EZ Aim Adhesive Thermal Sight Grid Target skips all that. It uses a patented Thermal ID treatment that gives off distinct heat signatures across different parts of the face, so your thermal or thermal-imaging scope picks up a crisp, readable image even under a bright midday sun. That means you can dial in your rig at the range on your own schedule instead of waiting for the conditions to cooperate.
What Makes the EZ Aim Thermal Grid Target Tick
The face is a 6×6 inch sight-in grid laid out with 1-inch gridlines, which makes it easy to count clicks and track your point of impact as you walk your shots to center. The grid pattern gives you clean reference lines for both windage and elevation adjustments, so confirming zero and mapping a group is straightforward. It runs on a durable paper face with a high-contrast gray and black design that reads well through the optic.
Sticking the EZ Aim Sight Grid Target Downrange
Setup is quick thanks to the adhesive back. Peel it and press the target onto a cardboard backer, poster board, or whatever stand you're running, and you're ready to shoot. No staples, no tape, no fuss. Allen lists an operating range of roughly -20 degrees F to 110 degrees F for best performance, so it holds up whether you're sighting in during a cold morning or the heat of summer.
This is a smart, low-cost way to get accurate results from thermal and night vision gear without fighting the light. It's made in America and comes as a single target, so you know exactly what's landing on your bench when you sit down to zero.
Key Specifications
- Manufacturer: Allen Company
- Manufacturer Part Number: 15789
- UPC: 026509076889
- Target Type: Thermal sight-in grid
- Target Size: 6 in. x 6 in.
- Grid Spacing: 1-inch gridlines
- Color: Black/Gray
- Face Material: Paper
- Backing: Adhesive
- Thermal Technology: Patented Thermal ID heat signature treatment
- Daylight Compatible: Yes
- Suggested Temperature Range: -20°F to 110°F (-30°C to +45°C)
- Quantity: 1 target
- Country of Origin: Made in USA
What’s Included
- 1 EZ Aim Adhesive Thermal Sight Grid Target (6×6)
Frequently Asked Questions
How does the EZ Aim thermal sight grid target work in daylight?
The target uses Allen's patented Thermal ID treatment, which creates distinct heat signatures across different segments of the face. Your thermal imaging scope reads those signatures as a clear image even in bright sun. That lets you sight in thermal optics during the day instead of waiting for low light.
Do I need a special stand to hang the thermal target?
No special stand required. The target has an adhesive back, so you just peel it and press it onto a cardboard backer, poster board, or your existing target stand. It's a fast, no-staple setup.
What is the grid on this thermal sight-in target used for?
The 6×6 face has 1-inch gridlines that act as a reference for your scope adjustments. You can count squares to gauge how far your point of impact is off and track windage and elevation as you walk shots to center. It makes confirming zero and mapping a group a lot easier.
Will the EZ Aim thermal target hold up in cold or hot weather?
Allen suggests an operating range of about -20 degrees F to 110 degrees F for the best thermal performance. That covers most range days, from frosty winter mornings to hot summer afternoons. Staying inside that window helps the heat signatures show up clearly through your optic.




Reviews
There are no reviews yet.