Description
Shotgun bores take a beating from plastic wad residue and powder fouling, and a flimsy screw-together rod usually just bows and flexes when you try to power through it. The Kleen-Bore OP108 fixes that with a single 34-inch length of aluminum and a fat 3/8-inch shaft that stays rigid under pressure. It's built specifically for scattergun duty, running the full range from .410 up through 10 gauge, so you can service everything from a light upland gun to a big goose gun with the same tool.
Why the One-Piece Design Matters
A segmented rod has joints, and joints trap grit and create ridges that can scrape a barrel. Since the Kleen-Bore OP108 is one continuous piece, there's nothing to loosen mid-stroke and nothing to catch. That large-diameter shaft gives you the backbone to push a snug patch or bore brush through heavy buildup without the wobble you get from thin, flexible rods that tend to bind or bend.
Handle and Patch Holder on the OP108
The sure-grip T-handle is the real workhorse here. It gives you leverage to scrub with real force, and because it doesn't spin, you stay in control when you're rotating a brush to follow the bore. The included all-gauge nylon patch holder grips patches securely and stays gentle on the bore, and the nylon threading plays nice whether you're running solvent or laying down a light coat of oil.
Storage and Everyday Use
Kleen-Bore packs this rod in a reusable storage tube, which is handy if you toss it in a range bag or keep it standing in the cabinet between hunts. It's a straightforward, made-to-last tool from a brand that's been building cleaning gear since the late seventies. If you've been fighting a short, bendy rod that never quite reaches, the extra length and stiffness here will feel like a real upgrade.
Key Specifications
- Manufacturer: Kleen-Bore
- Manufacturer Part Number: OP108
- Model: Heavy Duty One Piece
- UPC: 026249000397
- Working Length: 34 inches
- Rod Material: Aluminum
- Shaft Diameter: 3/8 inch
- Gauge Compatibility: .410 through 10 gauge
- Construction: One piece, non-segmented
- Handle: Sure-grip non-rotating T-handle
- Patch Holder: All-gauge nylon
- Thread: 5/16-27
- Made In: USA
What’s Included
- One piece 34-inch aluminum shotgun cleaning rod
- Sure-grip T-handle
- All-gauge nylon patch holder
- Reusable storage tube
Frequently Asked Questions
What gauges does the Kleen-Bore OP108 cleaning rod work with?
It's an all-gauge shotgun rod that handles everything from .410 bore up through 10 gauge. The 3/8-inch shaft is sized for shotgun barrels, so it isn't meant for rifle or handgun bores. One rod covers your entire shotgun lineup.
Why choose a one-piece rod over a screw-together sectioned rod?
One-piece rods have no joints to loosen, trap grit, or scrape the bore during a stroke. The solid 3/8-inch aluminum shaft stays rigid, so it pushes tight patches and brushes through heavy fouling without bowing or binding. Sectioned rods tend to flex and can come apart mid-clean.
Does the T-handle on the OP108 spin while you clean?
No, the T-handle is fixed rather than free-spinning. That's a deliberate design for shotguns, since it lets you rotate a bore brush or patch by hand to follow the barrel and gives you solid leverage to scrub with real force.
Will patches and brushes from other kits thread onto this rod?
The rod uses a 5/16-27 shotgun thread and comes with an all-gauge nylon patch holder. Most standard shotgun-thread accessories will fit right on, and an accessory adapter can expand it further if you want to run additional attachments.




Reviews
There are no reviews yet.