Description
The Otis Ripcord is built for the person who wants their bore cleaned quickly without dragging out a full kit. Made for .40 caliber and 10mm handguns, it pulls through from breech to muzzle in a single pass, so there's no fiddling with gravity feed or running patch after patch. The rigid, helix-shaped rubber core presses the cleaning surface against the bore and engages the rifling, while the braided Nomex fibers do double duty as a brush that loosens fouling and a patch that captures it on the way out.
What Makes the Ripcord Different From a Standard Bore Snake
Most bore snakes reuse the same brush and patch section over and over, which is why they need regular washing. The Ripcord takes a different approach with its molded core and 10 inches of aggressive cleaning surface wrapped in caliber-specific fibers, giving you 360-degree contact all the way around the bore. That helix design is a big part of why folks compare it to a cleaning rod that works backwards, pulling the crud out rather than pushing it through.
Cleaning at the Range With the .40 Cal Ripcord
The braided Nomex surface handles heat up to 700 degrees, so you can run it through a barrel that's still warm from shooting instead of waiting for it to cool. That makes it a natural fit for range bags and field kits, and the whole thing packs down small enough to toss in a pocket or pouch. Overall length runs 36 inches with 5-40 threaded brass ends, which lets you attach a bore brush or connect to other Otis cleaning components when you want a more thorough job.
Keeping Your Otis Ripcord in Good Shape
After use, most owners knock the loose debris off with a stiff brush and wipe it down, or give it a soak in warm soapy water and let it air dry. Skip the washing machine and dishwasher. Made in the USA and backed by the Otis No Nonsense warranty, this is a simple tool that earns its spot in the bag by getting the job done fast.
Key Specifications
- Manufacturer: Otis Technology
- Manufacturer Part Number: FGRC341
- UPC: 014895002216
- Caliber/Gauge: .40 Cal / 10mm (.400-.401)
- Cleaning Surface: 10 inches
- Overall Length: 36 inches
- Thread Pattern: 5-40
- Surface Material: Braided Nomex
- Core: Helix-shaped molded rubber
- Heat Resistance: Up to 700 degrees F
- Style: Pistol
- Product Type: Pull-Through Bore Cleaning Rope
- Quantity: 1
- Country of Origin: Made in USA
What’s Included
- Otis Ripcord .40 Caliber/10mm pull-through bore cleaner (1)
Frequently Asked Questions
Will the .40 caliber Ripcord work for both .40 S&W and 10mm handguns?
Yes, this Ripcord is designed for .40 caliber and 10mm bores, covering the .400 to .401 range. The caliber-specific rubber core is sized to press the cleaning surface firmly against the rifling for a proper fit in both. If you shoot .40 S&W and 10mm, one Ripcord handles the lineup.
How is the Otis Ripcord different from a traditional bore snake?
The Ripcord uses a rigid, helix-shaped rubber core that keeps the cleaning surface pressed against the bore and engages the rifling as it passes through. Many people describe it as a cleaning rod that works backwards, since it pulls fouling out from breech to muzzle in one motion. It doesn't need gravity feed like some pull-through cords do.
Can I clean the barrel right after shooting while it's still hot?
You can. The braided Nomex surface is rated to handle heat up to 700 degrees, so running it through a warm barrel at the range is no problem. That's a big reason it lands in so many range bags for quick cleanups between strings.
How do you clean the Ripcord itself after using it?
Most owners knock off loose debris with a stiff bristle brush and then wipe it down, or soak it in warm water with a little dish soap and let it air dry. Keep it out of the dishwasher and washing machine. A quick cleaning after each use keeps the fibers working well for the next pass.




Reviews
There are no reviews yet.