Description
There's a reason the CT Rage LR gets talked about as one of the top lightweight mountain rifles going. Fierce built this thing around a titanium Triad 3-lug action with a fast 70 degree bolt throw, then treated the bolt and action with their Armour Lube coating so cycling stays slick even when you're running the gun hard in cold, gritty conditions. At a listed 6.10 pounds, this .300 Win Mag carries like a rifle chambered in something much smaller, which your legs will appreciate on day four of an elk hunt.
What Sets the CT Rage LR Apart
The LR treatment takes the standard Carbon Rage and adds the features long-range hunters keep asking for. The C3 Carbon Rage stock gets a push-button adjustable comb, so dialing in a proper cheek weld behind a big scope takes seconds, no tools required. Up front there's an integral Picatinny rail for your bipod along with a mounting platform for a Swiss-Arca plate, and Fierce includes the plate. The TriggerTech match trigger is adjustable and breaks clean, which matters a lot more than people think when you're stretching shots past 500 yards. A detachable drop-box magazine holds four rounds with one in the chamber, and the 3-position safety lets you cycle the bolt safely with the trigger locked out.
A Carbon Barrel That Earns Its Keep
The 22 inch Fierce C3 carbon fiber barrel uses a match-grade, hand-lapped liner that's stress relieved before wrapping, finished in the company's Matrix treatment with a 1:10 twist that handles the heavy, high-BC bullets .300 Win Mag does its best work with. The muzzle is threaded and wears an included stainless radial brake, which takes real bite out of magnum recoil in a rifle this light. Every one leaves the factory test-fired with a certified target proving Fierce's half MOA guarantee, so you're not crossing your fingers at the range. Pair it with quality glass and this is a legitimate cross-canyon rig that won't wear you out getting there.
Key Specifications
- Manufacturer: Fierce Firearms
- Manufacturer Part Number: FCTRGLR300WIN22BCP
- UPC: 853418408780
- Caliber: .300 Winchester Magnum
- Action: Bolt Action, Titanium Triad 3-Lug, 70 Degree Bolt Throw
- Barrel Length: 22"
- Barrel: Fierce C3 Carbon Fiber, Match Grade, Threaded, Matrix Finish
- Twist Rate: 1:10
- Capacity: 4 + 1
- Magazine: Detachable Drop-Box
- Trigger: TriggerTech Adjustable Match
- Stock: C3 Carbon Rage with Push-Button Adjustable Comb
- Muzzle Device: Stainless Steel Radial Muzzle Brake
- Safety: 3 Position
- Weight: 6.10 lbs
- Accuracy Guarantee: 1/2 MOA with Certified Target
What’s Included
- Fierce CT Rage LR rifle
- One detachable drop-box magazine
- Radial stainless steel muzzle brake (installed)
- Swiss-Arca mounting plate
- Certified factory accuracy target
Frequently Asked Questions
How accurate is the Fierce CT Rage LR out of the box?
Fierce backs the CT Rage LR with a half MOA accuracy guarantee, and each rifle is test-fired at the factory with a certified target included in the box. With quality ammo the barrel is capable of tight groups right away. Independent range testing of the CT Rage line has consistently confirmed the guarantee is more than marketing talk.
Is the CT Rage LR too light for .300 Win Mag recoil?
At around 6.1 pounds bare, this rifle will move under magnum recoil, but the included stainless radial brake tames a big chunk of it. Add a scope, bipod, and a sling and you're closer to 8 pounds ready to hunt, which is very manageable. The Limbsaver-style recoil pad on the stock helps take the edge off as well.
Can I mount a suppressor on the CT Rage LR?
Yes, the 22 inch carbon fiber barrel comes threaded from the factory, so you can swap the radial brake for a suppressor or thread protector. Just keep in mind that adding a can changes point of impact, so plan on re-zeroing after the swap. Many hunters run this rifle suppressed since the light overall weight leaves room for it.
What is the adjustable comb on the CT Rage LR stock for?
The push-button adjustable comb lets you raise the cheekpiece to line your eye up perfectly with your scope, which is a big deal when running larger long-range optics with tall rings. Getting a consistent cheek weld improves accuracy shot to shot. Adjustment takes seconds and requires no tools, so you can tweak it right at the bench.


Reviews
There are no reviews yet.