Description
The scout rifle idea has always been about one gun that can handle just about anything: light, compact, fast to the shoulder, with sighting options for whatever the day throws at you. The Ruger American Gen II Scout checks those boxes in 5.56 NATO, which means cheap, easy-to-find ammo and next to no recoil. The 16.1 inch cold hammer-forged barrel wears a Cobalt Cerakote finish, carries a 1:8 twist that stabilizes everything from light varmint loads to 77 grain match bullets, and comes threaded 1/2×28 with a flash suppressor already installed. Swap it for a brake or a suppressor whenever you like.
Sights, Optics, and the Scout Setup
Out of the box you get AR-style pin and aperture iron sights with windage and elevation adjustment, and the rear aperture flips between two sizes for close work or longer shots. The factory-installed scout-length scope base takes intermediate eye relief optics, red dots, or even night vision and thermal units, so you can set this rifle up a half dozen different ways without touching a gunsmith. A removable low comb comes along too, giving you a better cheek weld under magnified glass while staying out of the way when you run the irons.
Gen II Upgrades That Earn Their Keep
The Gen II American platform brings a more rigid splatter-finished stock with real grip texture, a three-position tang safety that lets you cycle the bolt on safe, and a soft recoil pad with spacers that adjust length of pull from 12 to 13.75 inches. Ruger's Marksman trigger breaks clean and adjusts between 3 and 5 pounds, while the Power Bedding block free-floats the barrel for the kind of accuracy the American line is known for. The one-piece three-lug stainless bolt runs a short 70 degree throw with an oversized handle you can swap thanks to its threaded design.
Why the American Gen II Scout Makes Sense
Feeding from a 10-round AR-style magazine, this rifle works as a trainer, a ranch gun, a predator rig, or a lightweight all-arounder that lives behind the seat. At 37.35 inches overall, it stays handy in a blind or a UTV, and the Leaf Green stock looks sharp without shouting about it.
Key Specifications
- Manufacturer: Sturm, Ruger & Co.
- Model: American Rifle Generation II Scout
- MPN: 46965
- UPC: 736676469659
- Caliber: 5.56 NATO / .223 Rem
- Action: Bolt Action
- Capacity: 10+1, AR-Style Magazine
- Barrel Length: 16.1", Cold Hammer-Forged, Threaded
- Thread Pattern: 1/2"-28 with Flash Suppressor
- Twist Rate: 1:8" RH
- Barrel/Receiver Finish: Cobalt Cerakote
- Stock: Leaf Green Splatter Gen II Synthetic
- Sights: AR-Style Adjustable Front, Flip Aperture Rear
- Trigger: Ruger Marksman Adjustable, 3-5 lbs
- Overall Length: 37.35"
- Weight: 6.6 lbs
What’s Included
- Ruger American Gen II Scout rifle
- One 10-round AR-style magazine
- Removable low comb insert
- Steel sling swivel studs (installed)
- Length of pull spacer (installed)
- Owner's manual and cable lock
Frequently Asked Questions
Can I mount a regular riflescope on the Ruger American Gen II Scout instead of a scout scope?
Yes. The forward scout-length base is built for intermediate eye relief optics, but the receiver is drilled so you can run a conventional scope over the action with the right rings or rail. The included low comb snaps on to give you a proper cheek weld under magnified glass, and it comes off if you go back to the irons.
Does the American Gen II Scout take AR-15 magazines?
It feeds from AR-style magazines and ships with one 10-round mag from the factory. Most quality metal and polymer AR-pattern mags run well in it, which is a big plus since they are cheap and everywhere. Just note that some magazine designs feed more smoothly in bolt guns than others, so test a few before you stock up.
Is the 16.1 inch barrel threaded for a suppressor?
Yes, the muzzle is threaded 1/2×28, the standard pattern for 5.56 and .223 cans and muzzle devices. A flash suppressor comes installed from the factory, so you can spin it off and thread on a suppressor or brake without any extra work. Ruger also offers a stock weight kit if you want to rebalance the rifle with a heavier can up front.
Can I shoot .223 Remington in this 5.56 NATO chamber?
You can. Since the rifle is chambered in 5.56 NATO, it safely handles both 5.56 and .223 Remington ammunition. The 1:8 twist barrel does a nice job stabilizing a wide range of bullet weights, from lighter 55 grain plinking loads up to heavier 69 to 77 grain match bullets.




Reviews
There are no reviews yet.