Description
Yankee Hill Machine built the sRx system for people who are tired of fighting their suppressor mounts, and this short brake in 11/16×24 is a big part of why the setup works so well. It threads onto your .30 caliber barrel and pairs with the sRx Adapter (YHM-4400), which runs the industry standard 1-3/8×24 HUB thread. That means quick on-and-off mounting by hand, no tools, no wrench sessions at the range. The whole system was designed around clean looks and simple operation, and it shows.
Why the sRx Short Brake Earns Its Spot
The standout feature here is the internal taper seal sitting in front of the threads. When your suppressor spins on, that taper locks everything up solid and seals off the threads so gas and carbon never reach them. Anyone who has wrestled a carbon-welded can off a hot mount knows exactly why that matters. The taper also gives you consistent, repeatable mounting every time, and since there are no moving parts, there is nothing in the mount to wear out or rattle loose. Unsuppressed, the ported brake design does real work taming recoil and muzzle rise on .308 and 7.62 NATO rifles.
No Timing, No Shims, No Headaches
YHM calls this design timeless for a reason. There is no need to clock or shim the brake to your barrel, which makes installation about as painless as a muzzle device gets. It can even be permanently attached to the barrel if your build calls for it. The steel construction wears a black phosphate finish that shrugs off hard use and keeps the low-profile look intact.
Pairing the YHM sRx Short Brake With Your Can
Just remember this brake needs the sRx Adapter to complete the quick-detach interface, so grab one if you do not have it already. Together they play nice with HUB-compatible suppressors, including YHM's own Fat Cat and Cat's Ass cans. It runs lighter than a lot of QD mounts out there, and like everything YHM makes, it is built in the USA and backed by their lifetime warranty.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-4445-MB-24B
- UPC: 841812101819
- Model: sRx Short Q.D. Muzzle Brake
- Caliber: .308 / 7.62 NATO (.30 Cal)
- Thread Pattern: 11/16"x24 tpi
- Mounting Interface: sRx Adapter, 1-3/8"x24 HUB standard
- Material: Steel
- Finish: Black Phosphate
- Color: Black
- Timing Required: No shims or clocking needed
- Shipping Weight: 0.12 lbs
- Warranty: YHM Lifetime Manufacturer Warranty
- Made In: USA
What’s Included
- YHM sRx Short Muzzle Brake, 11/16×24 (YHM-4445-MB-24B)
Frequently Asked Questions
Do I need anything else to run a suppressor with the sRx Short Muzzle Brake?
Yes, this brake is one half of the system. It has to be paired with the YHM sRx Adapter (YHM-4400), which is sold separately and provides the quick-detach interface. The adapter threads onto the industry standard 1-3/8×24 HUB pattern, so it works with a wide range of HUB-compatible suppressors.
Does the YHM sRx Short Brake need to be timed or shimmed to the barrel?
No, and that is one of the best parts of the sRx design. The large taper in front of the threads handles alignment and sealing, so there is no clocking or shim stacking involved. Just install it and go.
Will carbon lock my suppressor onto this mount over time?
The sRx system was designed specifically to prevent that. The internal taper seal sits ahead of the threads and blocks gas and debris from reaching them while you shoot, so carbon cannot build up and weld your can to the mount. Removal stays smooth even after long suppressed range sessions.
What firearms is the 11/16×24 thread version made for?
This version fits .30 caliber barrels threaded 11/16×24, covering .308 and 7.62 NATO rifles with that thread pitch. If your barrel runs the more common 5/8×24 or a 5/8×32 pattern, YHM offers the sRx Short Brake in those pitches too. Double check your barrel threads before ordering.




Reviews
There are no reviews yet.