Description
Mission First Tactical built the Engage as a straight upgrade over the mushy plastic grip that ships on most AR-15 and M16 rifles. It's a full-size grip shaped around how your hand really wraps a rifle, with textured finger swells and a grooved backstrap that give you a positive hold whether you're running wet hands, thick gloves, or just a long day at the range. The oversized palm swell fills out your grip nicely, and the design is built to keep control locked in during reloads and one-handed work.
What Sets the Engage Grip Apart
The texturing here isn't overdone. It's aggressive enough to bite when you need it but won't chew up your palm over a full course of fire. There's also a small tab that covers the gap between the grip and the receiver, which knocks out that pinch point a lot of people feel during sustained shooting. Don't like it? Pop it off. It's designed to come out easy if you'd rather run without it.
Storage Built Into the Engage Pistol Grip
Inside the grip you get a sealed storage compartment with a plug-style cap that opens with one hand. It's a genuinely handy spot for a spare CR123 or two, a broken shell extractor, or small parts you don't want rolling around your bag. The included foam sled holds everything snug so you're not listening to gear rattle every time you move. A common tip from folks who use it: keep the compartment for lighter items so the cap stays seated during hard movement.
Fitment and Setup
The Engage drops onto M16, M4, AR-15, and HK416 platforms using the standard single-bolt grip mount. Worth noting, the grip screw and washer aren't included in the box, so if you don't already have the hardware from your old grip, grab a grip screw kit to go with it. Made in the USA from military-grade polymer, it runs light at right around 2.5 ounces and stands about 4.98 inches tall, so it adds real ergonomics without weighing your build down.
Key Specifications
- Manufacturer: Mission First Tactical
- Model: Engage AR Pistol Grip
- Manufacturer Part Number: EPG27
- UPC: 814002020665
- Color: Black
- Material: Military-Grade Polymer
- Fits: AR-15 / M16 / M4 / HK416
- Weight: 2.5 oz
- Height: 4.98 in
- Width: 1.341 in
- Length: 2.534 in
- Made In: USA
- Storage: Watertight compartment with foam sled
What’s Included
- (1) MFT Engage AR15/M16 Enhanced Pistol Grip – Black
- Foam storage sled
Frequently Asked Questions
Does the Engage pistol grip come with a grip screw and washer?
No, the mounting hardware is not included with this grip. If you're pulling off an existing grip you can reuse that screw and lock washer, otherwise pick up a grip screw kit so you're ready to install right away.
What rifles does the MFT Engage grip fit?
It's built for the standard AR platform, including AR-15, M16, M4, and HK416 lowers. It uses the common single-bolt grip mount, so installation is straightforward on any mil-spec compatible lower.
How useful is the storage compartment in the Engage grip?
The sealed compartment with its foam sled is a solid spot for spare optic batteries or small parts, and the plug cap lets you open it one-handed. For hard use, it's smart to keep lighter items inside so the cap stays seated during aggressive movement.
Is the texturing on the Engage grip too aggressive for bare hands?
Not at all. The finger swells and grooved backstrap give you a positive hold with wet or gloved hands, but the texture is dialed in so it won't tear up your palm over an extended range session.





Reviews
There are no reviews yet.