Description
One suppressor, more hosts. That's the whole point of Dead Air's piston system, and the DA407 is the piece that gets your Primal, Wolfman, or Ghost 45M mounted on pistols with M16x1 right-hand metric threads. If you're running an HK45 Tactical or another host with that metric thread pattern, this is the piston you need. It works as part of the P-Series booster assembly and spring, which handles the Nielsen device function that keeps tilting-barrel handguns cycling reliably with a can hanging off the muzzle.
Why the Ghost Piston Earns a Spot in Your Range Bag
Swapping pistons takes seconds, and that's what makes these worth stocking up on. Instead of buying a dedicated suppressor for every thread pitch in your safe, you keep one booster assembly and collect the pistons that match your barrels. The DA407 covers .45 caliber hosts with M16x1 RH threading, which shows up mostly on HK pistols and select aftermarket threaded barrels. It's a less common pitch than 1/2×28 or .578×28, so double-check your barrel before ordering. Metric threads are easy to mix up, and Dead Air makes a separate left-hand version (the DA406) for hosts like the USP45 Tactical and Mark 23.
Built Like the Rest of the Dead Air Lineup
This is a factory part, machined to the same standard as the suppressors it serves. The female threads seat square against your barrel shoulder for consistent lockup, and the piston body is made to take the heat and pressure inside a booster without wearing out early. Finished in black to match the rest of your setup.
Ghost Piston M16x1RH Compatibility Notes
The DA407 works with the Wolfman and Primal when paired with a booster assembly, plus the Ghost 45M and Wolf-9SD. It is not compatible with the Odessa-9 or Mojave suppressors, so keep that in mind if you run multiple Dead Air cans. Requires the P-Series booster assembly, which is sold separately if you don't already have one.
Key Specifications
- Manufacturer: Dead Air Silencers
- Manufacturer Part Number: DA407
- UPC: 810128161114
- Thread Pattern: M16x1 RH
- Caliber: .45 Cal
- Series: P-Series Piston
- Suppressor Compatibility: Primal, Wolfman, Ghost 45M, Wolf-9SD (booster assembly required)
- Function: Nielsen device piston for tilting-barrel handguns
- Color: Black
- Shipping Weight: 0.1 lb
What’s Included
- Dead Air Ghost Piston, M16x1 RH (DA407)
Frequently Asked Questions
Which suppressors does the Dead Air Ghost Piston M16x1RH work with?
It works with the Dead Air Primal and Wolfman when used with a P-Series booster assembly, along with the Ghost 45M and Wolf-9SD. It is not compatible with the Odessa-9 or Mojave. If you're unsure which booster your can uses, check with Dead Air before ordering.
Do I need anything else to use this piston?
Yes, this piston is one component of the P-Series booster assembly, which includes the booster housing and spring. If you already own a booster assembly for your suppressor, this piston swaps right in. If not, the booster assembly is sold separately.
What pistols use M16x1 RH threads?
This metric right-hand pitch shows up on the HK45 Tactical and some aftermarket .45 caliber threaded barrels. It's less common than 1/2×28 or .578×28, and it's easy to confuse with the left-hand M16x1 version used on the USP45 Tactical and Mark 23. Verify your barrel's exact thread pitch and direction before buying.
Is a piston even necessary on a tilting-barrel pistol?
Yes. Most centerfire pistols use a tilting-barrel action, and the added weight of a suppressor can keep the barrel from unlocking properly. The piston works with the booster spring as a Nielsen device, giving the barrel the momentum it needs to cycle reliably shot after shot.


Reviews
There are no reviews yet.