Description
There is a good argument that the best suppressor mount is the one you barely notice, and the Dead Air Xeno Xero makes that case well. At just over an inch long and 1.5 ounces, this 5/8-24 taper mount is the smallest and lightest mounting option Dead Air offers. That short length matters more than you might think. Less of the mount sticking into your suppressor's blast chamber means the can performs closer to its full sound suppression potential, especially on suppressors with shorter blast chambers where every fraction of an inch counts.
How the Xeno Xero Locks Up
The Xeno Xero uses a large taper interface and left-hand threads to give you repeatable, consistent lockup with a solid return to zero every time you spin your suppressor on. No latches, no lock rings, no ratchets to fumble with. Just thread it on and shoot. It works with any Dead Air Xeno adapter, which opens it up to a wide range of HUB-compatible suppressors including the Sierra 5, Nomad series, Primal, Wolfman, and Ghost 45 with the appropriate adapter. Dead Air also machined in generous 3/4 inch wrench flats, so tightening or removing the mount is simple even with the suppressor installed, something plenty of other mounts get wrong.
Built From the Right Steel
Dead Air went with 4140 heat-treated chrome moly steel here instead of the 17-4 stainless a lot of companies use, a smart pick since it resists galling over years of mounting and dismounting. The black nitride finish adds surface hardness and corrosion resistance so it holds up to hard use and ugly weather alike.
Where the Xeno Xero 5/8-24 Fits Best
This 5/8-24 version has a .458 bore, so it handles .45 caliber and smaller projectiles. That makes it a natural fit for .45 ACP subguns, .300 Blackout builds, and bolt guns in common 5/8-24 chamberings like .308. If you own an ultralight titanium suppressor, this mount makes even more sense. There is not much point shaving ounces off your can only to hang a heavy QD system off the muzzle. The Xeno Xero keeps things simple, light, and repeatable.
Key Specifications
- Manufacturer: Dead Air Silencers
- Model: Xeno Xero
- Manufacturer Part Number: DA128
- UPC: 810128160698
- Thread Pattern: 5/8"-24
- Bore Compatibility: .45 caliber and smaller projectiles
- Through Bore: .458"
- Material: 4140 HT Alloy Steel
- Finish: Black Nitride
- Length: 1.105"
- Weight: 1.50 oz
- Tool Interface: 3/4" wrench flats
- Adapter Compatibility: All Dead Air Xeno Adapters
- Color: Black
What’s Included
- Dead Air Xeno Xero 5/8-24 taper mount
Frequently Asked Questions
Do I need anything else to use the Xeno Xero with my suppressor?
Yes, your suppressor needs a Dead Air Xeno adapter, which is sold separately. The Xeno Xero works with all Xeno adapters, and those adapters fit a wide range of HUB-compatible suppressors like the Sierra 5, Nomad series, Primal, Wolfman, and Ghost 45. Once the adapter is installed in your can, it threads right onto the Xero mount.
What calibers can I shoot through the 5/8-24 Xeno Xero?
This version has a .458 through bore, so it handles .45 caliber and smaller projectiles. That makes it a great match for .45 ACP subguns, .300 Blackout, and standard 5/8-24 rifle threads like .308. Just make sure your suppressor is rated for the caliber you plan to run.
How is the Xeno Xero different from Dead Air's KeyMo mounts?
The Xeno Xero is a direct taper mount with no locking collar or ratchet mechanism, which makes it noticeably shorter and lighter than KeyMo. At 1.5 ounces and just over an inch long, it takes up less room in the blast chamber, which helps sound performance. KeyMo trades some of that weight savings for faster on-and-off handling, so it comes down to your priorities.
Will the Xeno Xero hold zero when I remove and reinstall my suppressor?
That is the whole point of the design. The large taper interface and left-hand threads give consistent, repeatable lockup, so your point of impact stays predictable shot after shot and remount after remount. It is a solid choice for precision bolt guns where return to zero matters most.





Reviews
There are no reviews yet.