Description
There is a lot to like about a .17 HMR that weighs 5.3 pounds and still shoots like it means it. The Savage B17 TimberLite Thumbhole gets there with an 18 inch carbon fiber wrapped stainless steel barrel, which trims weight off the front end without giving up the stiffness that makes flat-shooting rimfire cartridges so much fun. The 1:9 twist stabilizes 17 grain and 20 grain HMR loads just fine, and the muzzle comes threaded 1/2×28 with a cap installed, so adding a suppressor or muzzle device is a five minute job.
A Thumbhole Stock That Earns Its Keep
The gray stock with black spiderweb accents is more than a good look. The thumbhole design puts your hand in a relaxed, upright position that makes running the bolt fast and keeps your trigger finger landing in the same spot every time. It is cut ambidextrous, so left-handed folks are not stuck fighting the ergonomics. Two sling studs come standard for a sling or a bipod, and the whole package balances nicely for walking varmint fields all afternoon.
Built Around the AccuTrigger
Savage's AccuTrigger remains one of the best reasons to buy their rimfires. It adjusts from roughly 2.5 to 6 pounds without a trip to the gunsmith, breaks clean, and lets you squeeze every bit of accuracy out of the HMR cartridge. Feeding comes from a 10-round rotary magazine that sits flush and cycles smoothly, and a two-position tang safety falls naturally under your thumb.
Ready for Glass Out of the Box
There are no iron sights here, and that is by design. The receiver wears a 20 MOA Picatinny rail, which gives you plenty of elevation for stretching the .17 HMR out past typical rimfire distances. Mount a quality scope, spend a little time tuning the trigger to your liking, and this B17 TimberLite is set for prairie dogs, ground squirrels, steel plates, or just seeing how small a group you can print at 100 yards.
Key Specifications
- Manufacturer: Savage Arms
- Model: B17 TimberLite Thumbhole
- MPN: 70818
- UPC: 062654708183
- Caliber: .17 HMR
- Action: Bolt Action
- Barrel Length: 18 in
- Barrel: Carbon fiber wrapped stainless steel, threaded 1/2×28 with cap
- Twist Rate: 1:9
- Capacity: 10+1
- Magazine: 10-round rotary
- Trigger: AccuTrigger, user adjustable 2.5 to 6 lbs
- Stock: Ambidextrous fixed thumbhole, gray with black spiderweb
- Sights: None, 20 MOA Picatinny rail
- Safety: 2-position top tang
- Weight: 5.3 lbs
What’s Included
- Savage B17 TimberLite Thumbhole rifle
- One 10-round rotary magazine
- Muzzle thread protector cap
- Owner's manual
Frequently Asked Questions
Does the Savage B17 TimberLite Thumbhole come with sights or a scope?
No iron sights or scope are included. The receiver comes with a 20 MOA Picatinny rail installed, so you can mount just about any rimfire or centerfire scope with standard Picatinny rings. The built-in cant also helps if you plan on stretching the .17 HMR to longer distances.
Is the barrel on the B17 TimberLite threaded for a suppressor?
Yes, the 18 inch carbon fiber wrapped stainless barrel is threaded 1/2×28 and ships with a thread cap installed. That is the most common rimfire thread pattern, so most .17 and .22 caliber suppressors will spin right on. The light barrel keeps the rifle handy even with a can attached.
Can a left-handed shooter use the B17 TimberLite Thumbhole comfortably?
The thumbhole stock is cut ambidextrous and the tang-mounted safety sits on top of the grip where either hand can reach it. The bolt handle is on the right side, so lefties will still reach over to cycle it, but the overall layout is friendlier than most right-hand-only thumbhole designs.
Do the B17 rotary magazines work with other Savage B Series rifles?
The 10-round rotary magazine is shared across Savage's B17 line in .17 HMR. The B Series uses caliber-specific magazines, so a B22 mag in .22 LR or .22 WMR will not interchange with this rifle. Spare B17 rotary mags are widely available and inexpensive, so picking up a couple extra for range days is an easy call.






Reviews
There are no reviews yet.