Description
There's a lot to like about a .243 Winchester that weighs about 5.3 pounds and still shoots like a target rifle. The Ridgeline FFT is Christensen Arms doing what they do best, wrapping a 416R stainless barrel in aerograde carbon fiber and dropping it into a stock built with their Flash Forged Technology process. That FFT stock uses a monocoque carbon shell that skips the heavy internal fill you find in most composite stocks, shaving up to a full pound off the older Ridgeline while staying stiff enough to take a beating in the backcountry. Even the floorplate and bolt knob get the carbon treatment.
What Makes the Ridgeline FFT Shoot
The heart of this rifle is Christensen's Model 14 action, machined on the familiar Remington 700 footprint, so scope bases are easy to find. The spiral-fluted bolt runs smooth, feeding from a 4+1 internal magazine with a hinged floorplate. A TriggerTech trigger breaks clean with no creep, and the free-floated, button-rifled barrel is spot bedded into the stock. Christensen backs the whole setup with their Sub-MOA Guarantee, and the 1:10 twist handles the full range of .243 bullet weights, from light varmint loads up to 100 grain deer bullets.
A 243 Built for the Long Walk
The 20 inch barrel keeps overall length right around 40.5 inches, which makes this a genuinely handy rifle in a treestand, a truck, or on a steep climb. The muzzle is threaded 5/8×24 and ships with a removable stainless side-baffle brake, which takes the already gentle .243 recoil down to nearly nothing. That combination makes this a great pick for newer hunters, smaller-framed folks, or anyone who wants to watch their hits through the scope. Prefer a cleaner report? Spin the brake off and run the included thread protector, or add a suppressor.
Ridgeline FFT Details Worth Noting
The stainless barreled action wears well in rough weather, and the black stock with gray accents keeps the look understated. Between the weight, the balance, and the guaranteed accuracy, this is the kind of .243 that earns a permanent spot in the rotation for deer, antelope, and predators alike.
Key Specifications
- Manufacturer: Christensen Arms
- Model: Ridgeline FFT
- MPN: 801-06129-00
- UPC: 691328238871
- Caliber: .243 Winchester
- Action: Bolt Action (Rem 700 footprint)
- Barrel Length: 20"
- Barrel: Carbon fiber wrapped 416R stainless steel, free-floated
- Twist Rate: 1:10
- Muzzle: 5/8×24 threaded with removable side-baffle brake
- Capacity: 4+1 internal magazine with hinged floorplate
- Trigger: TriggerTech, single stage
- Safety: Two-position
- Stock: FFT carbon fiber sporter, black with gray accents
- Weight: Approx. 5.3 lbs
- Overall Length: 40.5"
What’s Included
- Christensen Arms Ridgeline FFT rifle
- Removable stainless side-baffle muzzle brake (installed)
- Thread protector
- Owner's manual
Frequently Asked Questions
Is the Christensen Arms Ridgeline FFT really guaranteed to shoot sub-MOA?
Yes, Christensen Arms backs the Ridgeline FFT with their Sub-MOA Guarantee, meaning it should print groups under one inch at 100 yards with quality factory ammunition. The carbon-wrapped, free-floated barrel, spot bedding, and TriggerTech trigger are the big reasons it gets there. As with any rifle, match-grade or premium hunting ammo will get you the best results.
Does the Ridgeline FFT use a detachable magazine?
No, this model feeds from a 4+1 internal magazine with a hinged floorplate. That keeps the rifle slim and light with nothing to lose in the field, which fits the mountain hunting mission. The floorplate drops open for quick and easy unloading.
What scope mounts fit the Ridgeline FFT 243?
The action is built on the Remington 700 footprint, so it accepts standard Rem 700 bases and rails, which are about as easy to find as scope mounts get. The receiver comes drilled and tapped with no iron sights, so plan on adding a scope before your first range trip.
Can I remove the muzzle brake or run a suppressor on this rifle?
Absolutely. The side-baffle brake threads onto a 5/8×24 muzzle and comes right off, and the rifle includes a thread protector for shooting without it. That standard thread pitch also means most common suppressors and other muzzle devices will thread on without adapters.




Reviews
There are no reviews yet.