Description
Running a YHM Sidewinder on a 9mm AR or another fixed-barrel gun with 1/2"-36 threads? Then you don't need the booster assembly working against you. Pistons and springs exist to help tilting-barrel handguns cycle, and on a fixed barrel they're just extra parts. This adapter from Yankee Hill Machine replaces the spring retainer, spring, and piston inside your suppressor, turning it into a simple direct thread setup that stays put shot after shot.
Built for the Sidewinder, Cobra M2, and Cobra
The YHM-3253 fits the full Sidewinder family along with the Cobra M2 and original Cobra, and it works with any caliber version of those cans rated for 9mm, .40, .45, and subsonic 300 Blackout. Installation is about as easy as it gets. Pull the booster components, thread the adapter in their place, and spin your suppressor onto the muzzle. The 1/2"-36 thread pitch is the standard on most 9mm AR barrels, so this is the go-to pick for PCC builds, and it suits plenty of other fixed-barrel pistol caliber rifles and large-format pistols too.
Why the Direct Thread Sidewinder Adapter Makes Sense
Beyond shedding a few unnecessary parts, going direct thread gives you a tighter lockup and one less assembly to clean and inspect. YHM machines this adapter from 17-4PH stainless steel and gives it a matte black finish that blends right in with the rest of the can. At just 3/4 of an inch, it keeps the whole package compact, and like the rest of the Yankee Hill lineup, it's made in the USA.
If you own multiple hosts, grab an adapter in each thread pitch you run. Swapping the suppressor between a 9mm carbine and a threaded rimfire or pistol host becomes a quick spin-off, spin-on job instead of a parts-swapping project at the bench. It's a small piece of hardware that makes a multi-gun suppressor setup a whole lot more convenient.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-3253
- UPC: 816701019674
- Model: Sidewinder Direct Thread Adapter
- Thread Pitch: 1/2"-36
- Material: 17-4PH Stainless Steel
- Finish: Matte Black
- Length: 3/4 in
- Compatibility: YHM Sidewinder, Cobra M2, and Cobra suppressors
- Caliber Rating: 9mm, .40, .45, subsonic 300 BLK
- Product Type: Suppressor Mount
- Made In: USA
What’s Included
- YHM Sidewinder Direct Thread Adapter, 1/2"-36 (YHM-3253)
Frequently Asked Questions
Which suppressors does the YHM Sidewinder 1/2"-36 adapter fit?
This adapter fits the Yankee Hill Machine Sidewinder family along with the Cobra M2 and original Cobra suppressors. It works with any caliber version of those cans, covering 9mm, .40, .45, and subsonic 300 Blackout. It is not a universal HUB mount, so it won't fit suppressors outside the YHM lineup.
How do I install the Sidewinder direct thread adapter?
Remove the spring retainer, spring, and piston from your suppressor's booster housing, then thread the adapter in their place. Once it's seated, the can threads directly onto any 1/2"-36 muzzle. No gunsmithing or special tools are needed, and you can swap back to the piston setup anytime.
What guns use 1/2"-36 muzzle threads?
The 1/2"-36 pitch is the common standard on 9mm AR-pattern carbines and large-format pistols, and it shows up on some other pistol caliber rifles as well. Double-check your barrel's thread markings before ordering, since 9mm hosts also come in 1/2"-28 and metric pitches. YHM makes this same adapter in several thread options if yours differs.
Can I use this adapter on a recoil-operated pistol like a Glock?
No, this adapter is for fixed-barrel hosts only. Tilting-barrel pistols need the piston and spring assembly, often called a Nielsen device or booster, to cycle reliably with a suppressor attached. Keep the booster setup for those guns and use this adapter on carbines and fixed-barrel platforms.





Reviews
There are no reviews yet.