0
0

Rugged Obsidian9 3-Lug Adapter 1/2×28 9mm HK Spec with Go/No Go Gauge

UPC: 859383006709

$68.00

518 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Direct-thread mounting works fine until you want your can off in a hurry, or on another host without spinning it for half a minute. This adapter from Rugged Suppressors fixes that. It threads onto any 9mm barrel with a 1/2×28 muzzle and converts it to an HK-spec 3-lug interface, the same pattern made famous by the MP5. Pair it with a 3-lug mount on your suppressor and you get quick, repeatable attachment with a simple twist and lock. No more fiddling with thread protectors or worrying about cross-threading at the range.

Why the Obsidian9 3-Lug Adapter Earns Its Spot on Your Barrel

The standout feature here is Rugged's patented Go/No Go gauge machined right into the adapter. Once your suppressor is seated, the gauge gives you clear confirmation that everything is fully locked up before you pull the trigger. That little bit of peace of mind matters when a loose can means a baffle strike. The adapter itself is steel with a black finish, built to hold up to hard range days, and made in the USA under Rugged's unconditional lifetime warranty.

Setting Up Your Rugged 3-Lug Adapter

Installation is straightforward. Rugged recommends red Loctite and 20 to 25 ft-lbs of torque when mounting the adapter to your barrel, and once it's on, it stays put. Because it follows the original HK 9mm 3-lug spec, it plays well beyond just the Obsidian9 too. Most major 3-lug suppressor mounts built to the same standard will lock right on. This piece is best suited to fixed-barrel hosts like pistol caliber carbines and subgun-style builds, not tilting-barrel pistols. One thing worth knowing before you order: this is the 9mm version, and 9mm and .45 ACP 3-lug systems are two different animals, so it will not work with .45 ACP 3-lug mounts. If your barrel is threaded 1/2×28 and you are building out a 9mm quick-detach setup, this is the barrel-side piece that ties it all together.

Key Specifications

  • Manufacturer: Rugged Suppressors
  • Manufacturer Part Number: OA003
  • UPC: 859383006709
  • Model: 3 Lug Adapter
  • Caliber: 9mm
  • Thread Pattern: 1/2×28 tpi
  • Lug Spec: 9mm HK 3-lug specification
  • Material: Steel
  • Finish: Black
  • Go/No Go Gauge: Yes, patented
  • Recommended Install Torque: 20-25 ft-lbs with red Loctite
  • Weight: 0.2 lb
  • Country of Origin: USA

What’s Included

  • Rugged Obsidian9 3-Lug Adapter, 1/2×28

Frequently Asked Questions

Will the Rugged Obsidian9 3-Lug Adapter work with suppressors other than the Obsidian9?

In most cases, yes. This adapter is machined to the original HK 9mm 3-lug specification, which is the standard nearly every 9mm 3-lug suppressor mount is built around. As long as your can wears a 9mm HK-spec 3-lug mount, it should lock onto this adapter just fine.

How do I install the 3-lug adapter on my barrel?

Rugged recommends applying red Loctite to the barrel threads and torquing the adapter to 20 to 25 ft-lbs. This is meant to be a semi-permanent install, so treat it like a muzzle device you plan to leave in place. Always double-check alignment with a rod before firing suppressed.

Does this adapter work with .45 ACP 3-lug mounts?

No. The 9mm and .45 ACP 3-lug systems use different dimensions and are not interchangeable. This is the 9mm HK-spec version, so it only pairs with 9mm 3-lug mounts. If you're running a .45 setup, you'll need the larger B&T-spec adapter instead.

What does the Go/No Go gauge on the Rugged 3-lug adapter do?

It's a patented feature built into the adapter that confirms your suppressor is fully seated and locked before you fire. You get a clear indication of proper engagement, which takes the guesswork out of quick-detach mounting and helps prevent a loose can from causing a baffle strike.

Additional information

UPC

859383006709

Manufacturer

Manufacturer Part Number

OA003

Caliber/Gauge

9mm

Color

Black

Length

1.5

Model

Package Height

1.5

Package Width

1.5

Product Type

Accessory-Silencer Accessories

Shipping Weight

0.2

Thread Pattern

1/2"-28 tpi

Reviews

There are no reviews yet.

Be the first to review “Rugged Obsidian9 3-Lug Adapter 1/2×28 9mm HK Spec with Go/No Go Gauge”