Description
Boosters belong on tilting-barrel pistols, not on your PCC. If you're hanging a Rugged Obsidian 9 or Obsidian 45 off a fixed-barrel carbine or subgun, this Fixed Mount is the piece that makes it right. It swaps in for the entire booster system, spring and all, and turns your Obsidian into a clean direct-thread can with a 1/2"-28 interface, which covers most 9mm hosts out there. Think CZ Scorpion, AR9 builds, SIG MPX, and plenty of other pistol caliber carbines running standard 9mm threads.
Why the Obsidian Fixed Mount Matters
Running a booster on a fixed barrel is asking for trouble, since the recoil-assist system has nothing to cycle against and just adds moving parts where you don't want them. The Fixed Mount solves that with a simple, rigid threaded connection. Fewer moving parts means a more consistent point of impact, a bit less weight up front, and one less thing to think about at the range. It threads directly into the back of the Obsidian in place of the piston assembly, so installation takes about a minute with basic tools.
Fitment on the Rugged Fixed Mount 1/2×28
This mount fits both the Obsidian 45 and Obsidian 9, and it's a stand-alone accessory, meaning you don't pair it with the 3-Lug Mount or the fixed barrel spacer. It's one or the other, and for threaded fixed barrels this is the cleaner setup. Rugged machines these to keep alignment true, so your baffle strikes stay in the nightmare category where they belong instead of on your workbench. Finished in matte black to match the can, and made in the USA.
If your Obsidian spends time on anything other than a tilting-barrel pistol, this is one of those small parts that earns its keep every single range trip. Grab the thread pitch that matches your host and you're set.
Key Specifications
- Manufacturer: Rugged Suppressors
- Model: Obsidian Fixed Mount
- Manufacturer Part Number: OF001
- UPC: 859383006358
- Thread Pattern: 1/2"-28 tpi
- Compatibility: Rugged Obsidian 9 and Obsidian 45 suppressors
- Intended Use: Fixed-barrel carbine and subgun platforms
- Function: Replaces booster/piston assembly for direct-thread mounting
- Finish: Matte Black
- Length: 1.5 in
- Weight: 0.2 lb
- Country of Origin: USA
What’s Included
- Rugged Obsidian Fixed Mount, 1/2"-28
Frequently Asked Questions
Does the Rugged Obsidian Fixed Mount work with both the Obsidian 9 and Obsidian 45?
Yes, it fits both. The Obsidian 9 and Obsidian 45 share the same rear mount interface, so this Fixed Mount threads into either can. Just make sure the 1/2"-28 thread pitch matches your host barrel, since Rugged offers this mount in several other pitches too.
Do I need to remove the booster to install this mount?
Yes, the Fixed Mount replaces the entire booster system, including the piston, spring, and retaining cap. You unscrew the booster assembly from the rear of the suppressor and thread this mount in its place. It's a quick swap and lets you go back to pistol duty just as easily later.
Can I use the Fixed Mount together with the 3-Lug Mount or fixed barrel spacer?
No, this is a stand-alone mounting accessory. It is not designed to work alongside the 3-Lug Mount or the fixed barrel spacer. For a threaded fixed barrel, this mount is all you need between the can and the muzzle.
What guns is the 1/2×28 version best suited for?
The 1/2"-28 pitch covers the majority of 9mm hosts, including AR9 builds, the CZ Scorpion, SIG MPX, and most other 9mm pistol caliber carbines with standard threaded barrels. It's meant for fixed-barrel firearms only, so keep the booster installed if you're shooting a tilting-barrel handgun.








Reviews
There are no reviews yet.