0
0

KynSHOT RB5007 AR-9 Hydraulic Recoil Buffer, 17-4 Stainless

UPC: 854476005065

$159.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Blowback 9mm carbines are known for one thing: that harsh, snappy recoil impulse that pulls your optic off target every time the bolt slams back and forth. The KynSHOT RB5007 was built to fix that. Instead of relying on a stack of dead weights like a standard buffer, it uses a patented hydraulic damping system that absorbs the rearward energy of the bolt carrier and slows things down, so the whole cycle feels smoother and more controlled behind the trigger.

What the RB5007 Does Behind the Buffer Tube

The magic here is the hydraulics. As the bolt carrier drives rearward, the buffer's internal system dampens that motion and helps eliminate bolt bounce as the next round chambers. KynSHOT rates it for around a 30 percent reduction in felt recoil, and the real-world payoff is less muzzle flip and quicker sight recovery. A lot of folks running these report being able to stay in the scope between shots instead of settling back onto target every time. It's machined from 17-4 stainless steel, so it holds up to the beating a PCC bolt dishes out.

Fitting the RB5007 to Your 9mm Build

This one is dialed in for 9mm PCC and AR-9 builds using a Mil-Spec carbine buffer tube with a 7-inch internal depth. It's optimized for barrels in the 3.5 to 7.5 inch range unsuppressed and runs with all common 9mm loads. Installation is about as easy as it gets: it's a drop-in swap for your existing buffer and pairs with any buffer spring you're already running. It can also be used in an A5 or AR-10 length tube with a 7.75-inch internal depth, though that setup usually calls for a KynSHOT spacer weight to get the mass right.

One thing worth passing along from KynSHOT: keep the weight in your bolt. Even with light competition loads, running a lightened bolt in a blowback PCC isn't recommended, and the RB5007 is tuned to work with the mass already in your carrier.

Key Specifications

  • Manufacturer: KynSHOT
  • Model: RB5007
  • Manufacturer Part Number: RB5007
  • UPC: 854476005065
  • Type: Hydraulic Recoil Buffer
  • Application: 9mm PCC / AR-9
  • Material: 17-4 Stainless Steel
  • Color: Silver
  • Buffer Tube Compatibility: Mil-Spec Carbine (7" internal depth); A5/AR-10 (7.75" internal depth)
  • Optimized Barrel Length: 3.5" to 7.5" (unsuppressed)
  • Felt Recoil Reduction: Up to 30%
  • Country of Manufacture: USA

What’s Included

  • KynSHOT RB5007 Hydraulic Recoil Buffer

Frequently Asked Questions

Will the RB5007 fit my AR-9 buffer tube?

The RB5007 is designed for 9mm PCC and AR-9 builds running a Mil-Spec carbine buffer tube with a 7-inch internal depth. It can also work in an A5 or AR-10 length tube with a 7.75-inch internal depth, though that configuration typically needs a KynSHOT spacer weight to get the mass right. It pairs with any buffer spring you're already using.

How is the KynSHOT RB5007 different from a standard weighted buffer?

A standard buffer just uses internal weights to slow the bolt, while the RB5007 uses a patented hydraulic damping system to absorb and control the bolt carrier's rearward energy. That's what helps eliminate bolt bounce during chambering and drops felt recoil by around 30 percent. The result is less muzzle flip and a smoother overall cycle.

Is the RB5007 hard to install?

Not at all. It's a drop-in replacement that swaps right in for your existing buffer with no gunsmithing needed. Just make sure your build matches the recommended buffer tube and barrel length specs.

Should I lighten my bolt when running the RB5007?

No. KynSHOT recommends keeping the factory weight in your bolt, even if you're shooting light competition loads. The RB5007 is tuned to work with the mass already in a blowback PCC carrier, so running a lightened bolt isn't advised.

Additional information

UPC

854476005065

Manufacturer

Manufacturer Part Number

RB5007

Color

HYDRAULIC RECOIL BUFFER

Length

8

Model

Product Type

Buffer

Reviews

There are no reviews yet.

Be the first to review “KynSHOT RB5007 AR-9 Hydraulic Recoil Buffer, 17-4 Stainless”