Description
Fierce built the Twisted Rogue line to bring the feel of their high-end custom rifles down to a price working hunters can justify, and the Ti Rogue version takes it a step further by swapping in a titanium action. That titanium 2-lug receiver follows the familiar 700 pattern, so mounts, bases, and aftermarket support are everywhere, and it shaves meaningful weight right where a mountain rifle needs it. The 70 degree bolt throw cycles fast and clears low-mounted scopes, and the spiral fluted, DLC-coated bolt runs slick even after a dusty week in elk country.
A 20 Inch .300 Win Mag That Makes Sense
A shorter barrel on a .300 Winchester Magnum is a trade plenty of hunters are happy to make these days, especially if a suppressor is part of the plan. The 20 inch match-grade barrel wears deep spiral fluting to cut weight and stiffen the profile, comes threaded 5/8×24, and ships with Fierce's NIX side port self-timing muzzle brake to tame magnum recoil. Hand-lapped and backed by Fierce's 3/4 MOA accuracy guarantee, it feeds off a 1:10 twist that stabilizes the heavy bullets that make the .300 Win Mag such a proven performer on elk, moose, and long cross-canyon shots. Overall length lands at a handy 42.5 inches, which is a real advantage in a shooting house, on horseback, or threading through dark timber.
Ti Rogue Details That Earn Their Keep
The Forest Carbon stock keeps things rigid and weatherproof, with an integral bipod rail up front so you can run a bipod or tripod setup without bolting on extra hardware. Feeding comes from a 3+1 internal box magazine with a hinged floorplate, a clean and snag-free arrangement that hunters have trusted for generations, and the receiver is drilled and tapped so mounting glass is straightforward. Black Cerakote over the metalwork handles rain, snow, and pack straps without complaint. If you want one rifle that covers everything from whitetail stands to backcountry mule deer, this one checks the boxes without weighing you down.
Key Specifications
- Manufacturer: Fierce Firearms
- Manufacturer Part Number: TWTROG300WIN20BF
- UPC: 853418404218
- Caliber: .300 Winchester Magnum
- Action: Bolt Action, Titanium 2-Lug, 700 Pattern
- Barrel Length: 20" Deep Spiral Fluted, Match Grade
- Muzzle Thread: 5/8×24
- Muzzle Device: NIX Side Port Self-Timing Brake
- Twist Rate: 1:10
- Capacity: 3+1, Hinged Floorplate Internal Box
- Stock: Forest Carbon with Integral Bipod Rail
- Finish: Black Cerakote
- Overall Length: 42.5"
- Optics Mounting: Drilled and Tapped Receiver
- Accuracy Guarantee: 3/4 MOA
- Shipping Weight: 7.8 lbs
What’s Included
- Fierce TWSTD Ti Rogue bolt action rifle
- NIX side port self-timing muzzle brake (installed)
- Owner's documentation
Frequently Asked Questions
Is a 20 inch barrel too short for .300 Win Mag?
You give up some velocity compared to a 24 or 26 inch tube, but you gain a rifle that is far easier to carry and maneuver, especially with a suppressor attached. Inside typical hunting distances the .300 Win Mag still hits plenty hard from a 20 inch barrel. For a lot of hunters, the handier package is well worth the trade.
Can I run a suppressor on the TWSTD Ti Rogue?
Yes. The muzzle is threaded 5/8×24, which matches most commercially available .30 caliber suppressors for direct mounting. Just remove the included NIX muzzle brake and thread your can on, or use a compatible mount if your suppressor requires one.
What makes the Ti Rogue different from the standard Twisted Rogue?
The Ti version uses a titanium action instead of stainless steel, which cuts weight and boosts corrosion resistance while keeping the same 700-pattern footprint. Both share the deep spiral fluted match-grade barrel and lightweight carbon stock. If you count ounces on backcountry hunts, the titanium action is the upgrade to get.
Will standard Remington 700 scope bases fit this rifle?
Yes, the receiver follows the 700 pattern and comes drilled and tapped, so long action 700-style bases and rails are compatible. That opens up a huge range of mounting options from just about every optics hardware maker. Fierce recommends torquing bases and rings to spec with a dab of thread locker for the magnum recoil.



Reviews
There are no reviews yet.