Description
Running a VICTRA-12 on a Beretta or Benelli with the Mobil choke system? This is the mount that ties it all together. The YHM-1256A threads directly into your barrel using the factory Mobil choke threads, giving the suppressor a rock-solid attachment point without any gunsmithing or barrel work. Spin it in, snug it down, and your shotgun is ready to host the can.
How the VICTRA-12 Mobil Mount Works
Here is what makes YHM's approach different from other shotgun suppressor mounts: this piece is purely a mounting interface, not a choke. It adds zero constriction to your shot load. Pattern control comes from the choke cone that sits in the front cap of the VICTRA-12 suppressor itself, so your spread stays predictable and you can swap choke cones at the muzzle end of the can instead of behind it. That design keeps installation simple and takes the guesswork out of how your suppressor affects your pattern.
Built From 17-4 Stainless With a Melonite Finish
Shotgun mounts live a rough life between plastic wads, hot gas, and powder residue, so YHM machined this one from 17-4 stainless steel and treated it with a Melonite finish for serious wear and corrosion resistance. At 2.89 inches long and well under half a pound, it adds minimal bulk to the muzzle while giving the suppressor a secure, repeatable mounting surface. The included V-12 Jam Nut locks everything in place so the assembly stays put through recoil and repeated firing.
Matching the Mount to Your Shotgun
YHM builds each VICTRA-12 mount for a specific choke pattern, and this one covers the Beretta/Benelli Mobil thread standard found on a huge number of popular semi-autos and pumps. If your barrel takes Mobil chokes, this is your mount. Guns running Optima HP or Crio Plus threads need their own dedicated versions, so double check what your barrel is threaded for before ordering. Made in the USA and backed by YHM's reputation for no-nonsense machining.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-1256A
- UPC: 841812102960
- Model: VICTRA-12
- Choke Thread Compatibility: Beretta/Benelli Mobil
- Material: 17-4 Stainless Steel
- Finish: Melonite, Black
- Length: 2.89 inches
- Weight: Approx. 2.4 oz
- Function: Suppressor mount only, no choke constriction
- Country of Origin: USA
What’s Included
- VICTRA-12 Mobil Mount Assembly
- V-12 Jam Nut (YHM-1250)
Frequently Asked Questions
Will the VICTRA-12 Mobil Mount change my shot pattern?
No. This mount adds zero constriction to the shot load, so it does not act as a choke at all. Pattern control is handled by the choke cone in the front cap of the VICTRA-12 suppressor, and YHM offers improved cylinder, modified, and full choke cones to dial in your spread.
Which shotguns does the YHM-1256A mount fit?
It fits shotguns threaded for the Beretta/Benelli Mobil choke system, which covers a wide range of popular Beretta and Benelli semi-autos and pumps. Keep in mind Beretta Optima HP and Benelli Crio Plus are different thread patterns, and YHM makes separate mounts for those. Check your barrel or owner's manual to confirm which choke system you have before ordering.
Do I need a gunsmith to install this mount?
Not at all. The mount threads into the barrel the same way a standard choke tube does, using your factory choke threads. Remove your existing choke, thread the mount in, secure it with the included jam nut, and you are ready to attach the VICTRA-12.
Does this work with suppressors other than the VICTRA-12?
No, this mount is purpose-built for the Yankee Hill Machine VICTRA-12 shotgun suppressor. The mounting interface and the front-cap choke cone system are specific to that platform, so it is not a universal shotgun suppressor adapter.



Reviews
There are no reviews yet.