0
0

Yankee Hill VICTRA-12 Benelli CRIO Plus Suppressor Mount, 17-4 SS

UPC: 841812102946

$89.00

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The VICTRA-12 suppressor did something smart with its mounting system: instead of building the choke and the mount into one expensive combined unit, Yankee Hill Machine split them apart. This mount handles the attachment side of that equation for Benelli shotguns threaded for CRIO Plus chokes. It spins right into your factory choke threads, no barrel work required, and gives the VICTRA-12 a solid, repeatable interface on your gun. Your shot constriction is handled separately by the choke cone installed up front in the suppressor itself, so this piece stays put on the barrel and just does its one job well.

Built Like the Rest of the VICTRA-12 System

YHM machines these mounts from 17-4 stainless steel, which is the right call for something living at the muzzle of a 12 gauge. The Melonite finish adds surface hardness and corrosion resistance, so wet duck blinds and humid dove fields will not chew it up. It comes in a clean matte black that blends in with the suppressor and most hunting guns. Keep in mind this is a mount only, not a choke, so it will not change your pattern on its own.

Why a Dedicated CRIO Plus Mount Makes Sense

Benelli's CRIO Plus thread pattern shows up on a lot of popular semi-autos and pumps, and this mount is cut specifically for it. That matters because a proper thread match means full engagement, correct alignment, and no adapter stacking between your barrel and a can full of moving shot. If you run guns with different choke patterns, YHM makes matching mounts for Remington, Beretta, Browning Invector, and others, so one VICTRA-12 can move between hosts by leaving a mount on each gun.

Setting Up Your VICTRA-12 on a Benelli

Installation is about as simple as swapping a choke tube. Thread the mount into the barrel, attach the suppressor, and use the jam nut to lock the offset bore in the correct orientation. Leaving a mount permanently installed on your Benelli makes suppressor swaps at the truck tailgate quick and painless.

Key Specifications

  • Manufacturer: Yankee Hill Machine
  • Model: VICTRA-12 Mount Assembly
  • Manufacturer Part Number: YHM-1254A
  • UPC: 841812102946
  • Thread Pattern: Benelli CRIO Plus choke threads
  • Compatible Suppressor: YHM VICTRA-12
  • Gauge: 12 Gauge
  • Material: 17-4 Stainless Steel
  • Finish: Melonite, Black
  • Length: 3.70"
  • Shipping Weight: 0.15 lb

What’s Included

  • VICTRA-12 Benelli CRIO Plus mount assembly

Frequently Asked Questions

Does the VICTRA-12 CRIO Plus mount replace my choke tube?

It threads into the same choke threads your tube uses, but it does not constrict your pattern. On the VICTRA-12 system, the choke is a separate cone installed in the front of the suppressor, and the can ships with an Improved Cylinder cone. That split design means you only buy one mount per gun and swap chokes inside the suppressor as needed.

Which shotguns will the YHM-1254A mount fit?

This version is machined specifically for the Benelli CRIO Plus choke thread pattern, found on many current Benelli semi-autos and pumps. If your Benelli uses the older Mobil thread pattern, you will want the YHM-1256A Beretta/Benelli Mobil mount instead. Check your barrel or manual to confirm which choke system your gun runs before ordering.

Do I need any gunsmithing to install this mount?

No. It installs by hand into your factory choke threads, about as easy as swapping a choke tube. Once the mount is in, the VICTRA-12 attaches to it and a jam nut locks the suppressor in the proper orientation for its offset bore.

Can I leave the VICTRA-12 mount installed when the suppressor is off?

Yes, and many owners leave one on each host gun for quick swaps. YHM sells a separate thread protector to cover the mount threads when the suppressor is not attached, which is worth grabbing if the gun will see field time without the can.

Additional information

UPC

841812102946

Manufacturer

Manufacturer Part Number

1254A

Color

Black

Length

3.70"

Model

Package Height

1.4

Package Width

3.2

Product Type

Accessory-Silencer Accessories

Shipping Weight

0.15

Reviews

There are no reviews yet.

Be the first to review “Yankee Hill VICTRA-12 Benelli CRIO Plus Suppressor Mount, 17-4 SS”