Description
There are lightweight hunting rifles, and then there's the Summit Ti. Christensen Arms took just about every weight-saving trick they know and put it into one rifle: a machined titanium action, a 416R stainless barrel wrapped in aerospace-grade carbon fiber, and a hand-laid Aerograde carbon fiber thumbhole stock in a natural carbon finish. The result is a 7mm Remington Magnum with a full 26-inch barrel that carries like a short-action sporter. When you're climbing into elk country with a pack already loaded down, that difference shows up fast.
What Makes the Summit Ti Different
The titanium receiver is the headliner here, machined with an integrated 0 MOA split Picatinny rail and a trued receiver face, then paired with a twin-lug, spiral-fluted, nitride-treated bolt with an M16-style extractor and dual ejectors for reliable magnum extraction. The barrel starts as a 416R stainless blank that gets button rifled, hand lapped, turned down to a slim profile, and wrapped in Christensen's proprietary carbon fiber. It's free floated, cut with a match chamber, and threaded 5/8×24 with a removable titanium radial brake and a stainless thread protector included. A fully adjustable match trigger and hinged floor plate with billet aluminum bottom metal round out the action.
A 7mm Rem Mag Built for the Long Haul
The 7mm Remington Magnum has earned its keep on everything from pronghorn to bull elk, and the 26-inch tube lets the cartridge stretch its legs with full velocity out of those long-for-caliber bullets. The thumbhole stock features full-length bedding, carbon fiber pillars, an enhanced comb, a modified beavertail forearm, and a recoil pad that takes the sting out of magnum loads. Christensen backs the whole package with a Half-MOA accuracy guarantee, so the rifle holds up its end of the deal. Feed it ammo it likes, put in your practice, and this is a legitimate cross-canyon hunting rig that won't wear you out getting there.
Key Specifications
- Manufacturer: Christensen Arms
- Model: Summit Ti
- MPN: CA10269-315325
- UPC: 810651025921
- Caliber: 7mm Remington Magnum
- Action: Bolt Action, Twin Lug Spiral Fluted Bolt
- Capacity: 3+1
- Barrel Length: 26 in
- Barrel: 416R Stainless Steel, Aerograde Carbon Fiber Wrapped, Free Floating
- Muzzle: 5/8×24 Threaded, Removable Titanium Radial Brake
- Receiver: Titanium with Integrated 0 MOA Split Picatinny Rail
- Stock: Aerograde Carbon Fiber Thumbhole, Natural Carbon Finish
- Trigger: Fully Adjustable Match Trigger
- Magazine Type: Hinged Floor Plate, Billet Aluminum Bottom Metal
- Accuracy Guarantee: Christensen Arms Half-MOA Guarantee
What’s Included
- Christensen Arms Summit Ti rifle
- Removable titanium radial muzzle brake
- Stainless steel thread protector
- Owner's manual
Frequently Asked Questions
How much does the Christensen Arms Summit Ti weigh?
The Summit Ti line starts around 5.5 pounds bare, which is remarkably light for a magnum rifle. This 7mm Rem Mag configuration with the 26-inch barrel and thumbhole stock runs a bit heavier, in the neighborhood of six to six and a half pounds before optics. Either way, it's one of the lightest full-length magnum hunting rifles you can buy.
Does the Summit Ti come with a muzzle brake?
Yes, it ships with a removable titanium radial brake already threaded onto the 5/8×24 muzzle, plus a stainless steel thread protector. The brake does a lot to tame 7mm Rem Mag recoil in a rifle this light. If you'd rather run a suppressor or shoot it clean, the standard threading makes swapping easy.
Is the Summit Ti accurate enough for long-range hunting?
Christensen Arms backs it with their Half-MOA accuracy guarantee, which is a higher bar than most factory rifles carry. The match chamber, hand-lapped free-floated barrel, full-length bedded stock, and adjustable match trigger all work toward that standard. With quality ammo and a good optic, it's fully capable of the cross-canyon shots the 7mm Rem Mag was built for.
How do you mount a scope on the Summit Ti's titanium action?
The receiver comes with an integrated 0 MOA split Picatinny rail machined right into the action, so there are no bases to buy or align. Just add Picatinny rings sized for your scope tube and you're set. The integrated rail keeps things rigid and shaves weight compared to bolt-on bases.




Reviews
There are no reviews yet.