0
0

TAPCO 10/22 Patriot CF Drop-In Barrel — .22 LR, 16.5″ Carbon Fiber

UPC: 810122800859

$439.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Ruger 10/22 is one of the most-built rimfires out there, and swapping the barrel is the single biggest bump you can give it in accuracy and personality. The TAPCO 10/22 Patriot CF Barrel handles both at once. It runs a Bentz match chamber, which is noticeably tighter than the loose factory sporting chamber, so your bullet sits truer to the bore and groups tend to tighten right up. At 16.5 inches and chambered in .22 LR, it's a natural fit for target work, plinking cans, and small game around the property.

What the Patriot CF Barrel Brings to Your Build

The headline here is the carbon fiber wrap in red, white, and blue. It's a genuine standout finish that keeps weight friendly compared to a solid steel bull barrel, so your rifle stays lively in the hands instead of front-heavy. Between the looks and the match chamber, you're getting a barrel that shoots as good as it shows.

Dropping the Patriot Barrel Into Your 10/22

Installation is about as approachable as gun work gets. Pull the action from the stock, back out the two V-block screws, slide the old barrel free, seat this one, and torque the block back down. Most folks knock it out in around twenty minutes with basic Allen wrenches and no gunsmith required. Because it's a drop-in design, it mates to the standard Ruger V-block setup right out of the box.

Feeding the Bentz Chamber

One thing worth knowing with any Bentz-chambered barrel: it likes standard and high-velocity .22 LR and rewards quality ammo with its best accuracy. Steer clear of hyper-velocity loads like CCI Stingers, since those longer cases aren't a good match for the tighter chamber. Feed it decent 40-grain rounds and this barrel will reward you with consistency the factory tube can't touch.

Key Specifications

  • Caliber: .22 LR
  • Barrel Length: 16.5"
  • Chamber: Bentz Match Chamber
  • Finish: Red, White & Blue Carbon Fiber
  • Fitment: Ruger 10/22 (Drop-In)
  • Mounting: Standard Ruger V-Block
  • Manufacturer: TAPCO
  • Manufacturer Part Number: TAP22088
  • UPC: 810122800859
  • Muzzle: Non-Threaded
  • Shipping Weight: 1.8 lb

What’s Included

  • TAPCO 10/22 Patriot CF drop-in barrel (16.5", .22 LR)

Frequently Asked Questions

Will the TAPCO Patriot CF barrel fit my Ruger 10/22 without gunsmithing?

Yes. It's a true drop-in barrel built for the standard Ruger 10/22 platform and uses the factory V-block setup. You pull the action from the stock, remove the two V-block screws, swap barrels, and torque the block back down. Most owners finish the job in about twenty minutes with basic Allen wrenches.

What ammo works best in this Bentz chamber barrel?

The Bentz chamber is a match-style chamber that's tighter than the factory sporting chamber, so it delivers its best accuracy with quality standard and high-velocity .22 LR. It's best to avoid hyper-velocity rounds like CCI Stingers, since those longer cases don't pair well with the tighter chamber. Good 40-grain loads will get you consistent, accurate results.

Does the Patriot CF barrel actually improve accuracy over the factory barrel?

It should. A tighter Bentz chamber seats the cartridge more consistently than the loose factory sporting chamber, which typically shrinks group sizes. Swapping to a match-chambered aftermarket barrel is widely considered the single most effective accuracy upgrade you can make to a 10/22.

Is the muzzle threaded on this barrel?

No, this Patriot CF barrel is the non-threaded version. If you want to run a muzzle device or suppressor, TAPCO offers a separate threaded Patriot barrel cut with 1/2×28 threads. This model is a clean, plain-muzzle 16.5" barrel.

Additional information

UPC

810122800859

Manufacturer

Manufacturer Part Number

TAP22088

Product Type

Accessory-Barrels

Shipping Weight

1.8

Package Width

3.2

Package Height

2.2

Caliber/Gauge

.22 LR

Barrel Length

16.5"

Reviews

There are no reviews yet.

Be the first to review “TAPCO 10/22 Patriot CF Drop-In Barrel — .22 LR, 16.5″ Carbon Fiber”