Description
Muzzle devices that pull double duty are worth their weight, and the Wilson Combat Quell K-Mount is a great example. On its own, this 1/2×28 mount works as a legitimate flash hider, cutting muzzle flash on par with the classic M16A1 style device that has been the benchmark for decades. Thread on a Wilson Combat Quell suppressor and it becomes your quick attach and detach interface, so you can swap between suppressed and unsuppressed setups without wrenching your can on and off the barrel threads every time.
Built for Wilson Combat Quell Suppressors
This is the required mount for running the Quell line of suppressors, including the stainless and Ultralight titanium models. Wilson Combat machines these to tight tolerances, which matters when a suppressor is hanging off the front of your barrel. A solid, repeatable lockup means minimal point of impact shift when you take the can on and off, and that consistency is a big part of why the Quell system has earned a following. The 1/2×28 thread pitch fits standard .223 and 5.56 AR-15 barrels, so odds are good it threads right onto what you already own.
K-Mount Installation Made Simple
No proprietary tools or crush washers to fuss with here. The K-Mount installs with a standard 7/8 inch 12-point socket, and Wilson Combat recommends torquing to 20 foot pounds max. Thread it on by hand first to confirm smooth engagement, snug it down with a torque wrench, and you are done. The black nitride treatment is more than cosmetic too. It hardens the surface, resists corrosion, and holds up to repeated heat cycles and range abuse, so the finish still looks right after plenty of rounds downrange.
If a Quell suppressor is in your plans, or already sitting in your safe, picking up a K-Mount for each rifle you shoot lets one can serve your whole 5.56 lineup. Set the mounts once and move the suppressor between guns in seconds.
Key Specifications
- Manufacturer: Wilson Combat
- Model: Quell K-Mount
- Manufacturer Part Number: SPKMB1612X28
- UPC: 810025501525
- Thread Pitch: 1/2×28
- Caliber Compatibility: .223 Remington / 5.56 NATO
- Finish: Black Nitride
- Function: Flash hider and Quell suppressor quick attach interface
- Install Tool: 7/8 in. 12-point socket
- Recommended Torque: 20 ft-lbs maximum
- Shipping Weight: 0.25 lb
What’s Included
- Wilson Combat Quell K-Mount 1/2×28 muzzle device
Frequently Asked Questions
Does the Quell K-Mount work as a flash hider without a suppressor attached?
Yes, that is one of its main selling points. With no suppressor mounted, the K-Mount reduces muzzle flash at a level comparable to the proven M16A1 style flash hider. That means your rifle stays practical to shoot whether the can is on or off.
What tools do I need to install the Wilson Combat K-Mount?
Just a standard 7/8 inch 12-point socket and a torque wrench. Thread it on by hand first to make sure it engages smoothly, then torque to a maximum of 20 foot pounds with the barrel properly supported. No proprietary wrenches or special hardware required.
Which suppressors is the Quell K-Mount compatible with?
The K-Mount is the dedicated quick attach and detach interface for Wilson Combat Quell suppressors, including the stainless steel and Ultralight titanium versions. It is not a universal mount, so it is not designed to pair with cans from other manufacturers.
Will the 1/2×28 version fit my AR-15 barrel?
If your barrel has standard 1/2×28 muzzle threads, which is the norm for .223 and 5.56 AR-15 barrels, this version will fit. Wilson Combat also offers the K-Mount in other thread pitches like 5/8×24 for larger calibers, so double check your barrel threads before ordering.




Reviews
There are no reviews yet.