Description
The 6.5 PRC has earned its spot as one of the best all-around western hunting cartridges, and the Vanguard Weatherguard SS gives it a home that can take a beating. This version of the Weatherguard wears a stainless finish on the barreled action instead of the usual Cerakote colors, paired with a rugged synthetic Monte Carlo stock. Rain, wet snow, a week strapped to a pack in the high country, none of it should slow this rifle down.
What the Weatherguard SS Brings to the Table
Under the weather protection sits the proven Vanguard action, a smooth two-lug push feed with a one-piece machined and fluted bolt, fully enclosed bolt sleeve, and an integral recoil lug on the forged receiver. The three-position safety lets you cycle the bolt with the safety still engaged, which is a feature you learn to appreciate when unloading at the truck. Feeding comes from an internal box magazine with a hinged floorplate, holding 3+1 in 6.5 PRC. The two-stage match trigger breaks clean from the factory and adjusts down to around 2.5 pounds if you like it lighter.
A 24 Inch Threaded Barrel Built for the 6.5 PRC
The cold hammer forged 24 inch barrel gives the 6.5 PRC the velocity it was designed around, and the 1:8 twist stabilizes the long, high-BC bullets that make this cartridge shine at distance. The muzzle is threaded and ships with a thread protector, so adding a suppressor or brake is a five-minute job. The receiver comes drilled and tapped, ready for your bases and glass.
Accuracy You Can Bank On
Every Vanguard is backed by Weatherby's sub-MOA guarantee: a three-shot group of .99 inch or better at 100 yards from a cold barrel with qualifying premium ammunition. That kind of confidence out of the box, combined with a stainless build that shrugs off the elements, makes the Weatherguard SS a smart pick for hunters who refuse to stay home when the forecast turns ugly.
Key Specifications
- Manufacturer: Weatherby
- Manufacturer Part Number: VC4065PPR4T
- UPC: 747115463954
- Action: Bolt Action
- Caliber: 6.5 PRC
- Barrel Length: 24" cold hammer forged, threaded
- Twist Rate: 1:8"
- Capacity: 3+1
- Magazine Type: Internal box with hinged floorplate
- Trigger: Adjustable two-stage match trigger (down to 2.5 lbs)
- Safety: 3-position
- Stock: Synthetic Monte Carlo
- Finish: Stainless barreled action
- Optics: Receiver drilled and tapped for scope bases
- Accuracy: Sub-MOA guarantee with qualifying premium ammunition
What’s Included
- Weatherby Vanguard Weatherguard SS rifle
- Thread protector (installed on muzzle)
- Owner's manual
Frequently Asked Questions
Does the Vanguard Weatherguard SS come with a scope or sights?
No, it ships without sights or optics. The receiver is drilled and tapped for scope bases, so you just need rings and a base setup to mount your glass. Weatherby-pattern Vanguard mounts from Talley and standard Howa 1500 pattern bases both fit this action.
Can I put a suppressor on this rifle?
Yes, the 24 inch barrel comes threaded from the factory with a thread protector installed, so it accepts suppressors and muzzle brakes without a trip to the gunsmith. A muzzle brake is not included. The 6.5 PRC is a pleasant cartridge to shoot suppressed thanks to its moderate recoil.
What is Weatherby's sub-MOA guarantee on the Vanguard?
Weatherby guarantees every Vanguard will shoot a three-shot group of .99 inch or less at 100 yards from a cold barrel using Weatherby factory or premium ammunition. The guarantee applies to the original purchaser within two years of the verified purchase date. In practice, most Vanguards will do this and better once you find the load your barrel likes.
How does the Weatherguard SS feed, does it use a detachable magazine?
No detachable magazine here. It feeds from an internal box magazine topped with a hinged floorplate, holding three rounds of 6.5 PRC plus one in the chamber. The floorplate drops open for quick, safe unloading without cycling rounds through the action.



Reviews
There are no reviews yet.