Description
The Big Boy X Model is what happens when Henry stops worrying about polished brass and builds a lever gun for the field. This one wears a matte blued 17.4 inch round barrel over black synthetic furniture, and it runs .44 Magnum or .44 Special through a 7-round tube magazine. The big news for longtime Henry fans is the side loading gate, which lets you top off the magazine without pulling the inner tube. That matters more than you might think, especially if you hang a suppressor on the factory 5/8×24 threaded muzzle, since a can blocks tube removal entirely. A knurled thread protector keeps things tidy when the muzzle is bare.
Sights, Optics, and Mounting Room on the Big Boy X
Out of the box you get a green fiber optic front paired with a red fiber optic rear, a contrast that makes sight alignment quick even in dim timber. The receiver comes drilled and tapped if you would rather run a scope or red dot, and the forend adds M-LOK slots on both sides plus a short Picatinny rail up front for a light or laser. Two sling studs and a solid rubber recoil pad round out the furniture, and the 14 inch length of pull fits most folks comfortably.
Why a .44 Mag Lever Gun Like the H012X Earns Its Keep
A .44 Magnum picks up serious steam out of a carbine barrel, with common 240 grain loads gaining several hundred feet per second over a revolver. That is plenty for deer and hogs inside 100 yards or so, yet recoil out of a 7.3 pound rifle stays soft enough that a long range session is fun rather than punishing. The 1:20 twist stabilizes heavy bullets well, and .44 Special loads turn it into a genuine pussycat for new or recoil-sensitive family members.
At 36.3 inches overall, this is a handy truck, cabin, and treestand rifle backed by a transfer bar safety and Henry's made in the USA build quality. Classic lever feel, modern job description.
Key Specifications
- Manufacturer: Henry Repeating Arms
- Model Number (MPN): H012X
- UPC: 619835200235
- Action: Lever Action
- Caliber: .44 Rem Mag / .44 Special
- Capacity: 7+1 (removable tube magazine with side loading gate)
- Barrel Length: 17.4" round blued steel
- Muzzle Thread: 5/8×24 with thread protector
- Twist Rate: 1:20
- Overall Length: 36.3"
- Weight: 7.3 lbs
- Length of Pull: 14"
- Sights: Adjustable fiber optic front and rear
- Optics Ready: Receiver drilled and tapped
- Stock: Black synthetic with M-LOK slots, Picatinny rail, and sling studs
- Safety: Transfer bar
What’s Included
- Henry Big Boy X Model H012X rifle
- Screw-on muzzle thread protector (installed)
- Owner's manual
Frequently Asked Questions
Can the Henry Big Boy X Model shoot .44 Special as well as .44 Magnum?
Yes, it feeds and fires both .44 Rem Mag and .44 Special. Specials make for a very soft-recoiling, budget-friendly range load, while full-power Magnums handle hunting and defensive duty. It is a nice way to get two personalities out of one rifle.
Is the H012X suppressor ready out of the box?
It is. The muzzle comes threaded 5/8×24 from the factory with a knurled thread protector, so a suppressor or other muzzle device spins right on with no gunsmithing. The side loading gate is a big help here too, since a mounted can blocks the removable magazine tube, and the gate lets you keep the rifle topped off anyway.
Can I mount a scope or red dot on the Big Boy X?
Yes, the receiver comes drilled and tapped, so you just need an appropriate base and rings for a scope or a mounted red dot. The factory fiber optic sights are bright and quick if you prefer to keep it simple, with a green front and red rear that contrast nicely.
Is a .44 Magnum lever action like this enough gun for deer hunting?
Absolutely, within reasonable range. The 17.4 inch barrel adds a healthy velocity bump over a revolver, pushing common 240 grain loads well past what a handgun delivers, which makes it a solid whitetail and hog rifle at woods distances. It is a favorite pick for treestand and thick-brush hunts where a light, fast-handling carbine shines.




Reviews
There are no reviews yet.