Description
Straight-pull rifles have been a European favorite for years, and the Beretta BRX1 is the rifle that finally brought the concept stateside in a big way. Instead of the usual lift, pull, push, drop routine, you just yank the bolt straight back and shove it forward. No wrist rotation, no breaking your cheek weld, and your eye stays on the animal the whole time. Behind that speed is a stout 8-lug rotating bolt head that locks directly into the barrel extension, so you get fast cycling without giving up the strength of a conventional action.
A 6.5 Creedmoor Built to Stretch Its Legs
This version pairs the flat-shooting 6.5 Creedmoor with a 22 inch cold hammer forged barrel, threaded 5/8×24 at the muzzle for a suppressor or brake and capped from the factory. Beretta guarantees sub-MOA accuracy out of the box, and the crisp single-stage trigger helps you hold up your end of the deal. The trigger offers three selectable pull weights via a simple slider, so you can run it lighter for deliberate shots or a bit heavier with gloves on. A rear-bolt mounted 3-position safety operates quietly, which matters more than you might think when a buck is standing forty yards away.
One BRX1 Receiver, Multiple Calibers
The barrels are fully interchangeable, and each one carries its own receiver extension with the Picatinny optics rail attached. That means you can swap to a different caliber down the road without pulling your zeroed scope, using little more than an Allen wrench. Bolt heads and magazines swap just as quickly, turning one rifle into a whole safe's worth of options.
Ambidextrous From the Ground Up
Lefties get a rare treat here. The bolt handle, safety, and magazine release all work from either side, and the bolt handle itself can be switched over without gunsmithing. The black synthetic stock features an adjustable length of pull and a negative comb that keeps recoil moving straight back instead of into your face. At around 7.3 pounds bare, it carries well on long hikes and settles nicely on sticks or a pack. It ships with one 5-round detachable magazine, ready for glass and a trip to the range.
Key Specifications
- Manufacturer: Beretta
- Model: BRX1
- MPN: JBRX1E382/22
- UPC: 082442981437
- Caliber: 6.5 Creedmoor
- Action: Straight-Pull Bolt Action
- Barrel Length: 22 in, cold hammer forged
- Muzzle Thread: 5/8×24 with thread protector
- Capacity: 5+1
- Trigger: Single-stage, three selectable pull weights
- Safety: 3-Position, rear-bolt mounted
- Stock: Black synthetic, adjustable length of pull
- Optics Mount: Picatinny rail on receiver extension
- Overall Length: 43 in
- Weight: Approx. 7.3 lbs
- Sights: No iron sights, optics ready
What’s Included
- Beretta BRX1 rifle
- One 5-round detachable magazine
- Muzzle thread protector cap
- Owner's manual
Frequently Asked Questions
How is the Beretta BRX1 different from a regular bolt action rifle?
The BRX1 is a true straight-pull design, which means you cycle the action by pulling the bolt straight back and pushing it forward with no upward rotation of the handle. That makes follow-up shots noticeably faster and lets you keep your head on the stock and your eye in the scope. Lockup is handled by an 8-lug rotating bolt head, so the action is every bit as strong as a traditional turn-bolt.
Can I change calibers on the BRX1?
Yes, that is one of the rifle's biggest selling points. Beretta offers caliber conversion kits, and barrels swap with just an Allen wrench. Since the Picatinny rail rides on the barrel's receiver extension, your scope stays zeroed to each barrel, and the bolt head only needs changing when moving between standard and magnum cartridges.
Is the Beretta BRX1 suppressor ready?
It is. The 22 inch cold hammer forged barrel comes threaded 5/8×24 from the factory, which is the standard thread pitch for most 6.5mm and .30 caliber suppressors and muzzle brakes. A knurled thread protector is installed to keep the threads clean until you are ready to mount something.
Does the BRX1 work well for left-handed hunters?
It is one of the most lefty-friendly rifles on the market. The controls are fully ambidextrous, and the bolt handle can be reversed to the left side without a trip to the gunsmith. Even the magazine release and safety are set up to work equally well from either shoulder.



Reviews
There are no reviews yet.