Description
Bergara made its name building barrels for custom rifle shops before it ever put its own name on a complete gun, and that heritage is the whole point of the B-14 Ridge. This one comes chambered in 7mm Remington Magnum, a cartridge that has been flattening elk, mule deer, and pronghorn across the West for over sixty years. The 24 inch barrel gives the big seven room to reach its full velocity potential, and the 1:9.5 twist stabilizes the heavy, high BC bullets that make this cartridge such a strong performer past 400 yards.
What Makes the B-14 Ridge Worth a Look
The barrel is 4140 chrome moly steel in a stiffer number 5 taper, finished in Graphite Black Cerakote to shrug off rain, snow, and pack straps. The muzzle is threaded 5/8×24 with a thread protector included, so you can spin on a brake to tame magnum recoil or run a suppressor without a trip to the gunsmith. Behind it sits Bergara's B-14 action, a two-lug design with a coned bolt nose and sliding plate extractor that feeds and cycles noticeably smoother than most rifles in this class. The receiver is drilled and tapped for Remington 700 pattern rings and bases, which means scope mounting options are about as wide open as they get.
Built for Real Hunting Conditions
The stock is glass fiber reinforced polymer with integral pillars molded in for a stable bedding surface, and the SoftTouch coating gives it a slightly tacky feel that stays secure with cold or wet hands. The internal box magazine holds three rounds of 7mm Rem Mag under a hinged floorplate, so there is no detachable mag to lose in the snow. A two-position safety and Bergara's Performance Trigger, breaking clean at roughly three pounds, round out a rifle that comes out of the box ready to shoot well. Add glass, find your load, and this thing will hold its own against rifles costing considerably more.
Key Specifications
- Manufacturer: Bergara
- Model: B-14 Ridge
- MPN: B14LM502C
- UPC: 043125016280
- Caliber: 7mm Remington Magnum
- Action: Bolt Action (B-14 Two-Lug)
- Barrel Length: 24 inches
- Barrel Material: 4140 Chrome Moly Steel, #5 Taper
- Twist Rate: 1:9.5
- Muzzle Thread: 5/8×24 with Thread Protector
- Capacity: 3+1, Hinged Floorplate
- Stock: Synthetic with SoftTouch Finish
- Metal Finish: Graphite Black Cerakote
- Safety: Two-Position
- Scope Mounting: Drilled & Tapped, Rem 700 Pattern
- Hand Orientation: Right Hand
What’s Included
- Bergara B-14 Ridge rifle
- Thread protector (installed)
- Owner's manual
Frequently Asked Questions
Will a suppressor or muzzle brake fit the B-14 Ridge?
Yes. The muzzle comes threaded 5/8×24, which is the most common thread pattern for 30 caliber and smaller suppressors and brakes. A thread protector ships installed, so the muzzle stays clean if you run it bare.
What scope mounts work with the Bergara B-14 Ridge?
The receiver is factory drilled and tapped for Remington 700 pattern rings and bases, which is about the most widely supported footprint out there. Rails, two-piece bases, and ring options from just about every mount maker will bolt right up. No sights come on the rifle, so plan on adding glass before your first range trip.
Does this B-14 Ridge use a detachable magazine?
No, this model feeds from an internal box magazine with a hinged floorplate that holds three rounds of 7mm Rem Mag, plus one in the chamber. A lot of hunters prefer the floorplate setup since there is no magazine to rattle, drop, or lose in the field. Unloading is quick too, just pop the floorplate and the rounds drop into your hand.
How accurate is the Bergara B-14 Ridge out of the box?
Bergara backs the B-14 line with a sub-MOA guarantee using quality factory match grade ammo, and the Ridge routinely lives up to it. The combination of a Bergara barrel, pillar bedded stock, and a trigger set around three pounds gives it a real edge over most production hunting rifles at this level. Spend a little time finding the load your barrel likes and it will reward you.




Reviews
There are no reviews yet.