Description
There's a reason the PPK silhouette is one of the most recognized in the world, and this version lets you enjoy it without burning through centerfire ammo. The Walther PPK/S .22 LR is a true 1-to-1 scale of the .380 original, so you get the same profile, the same controls, and the same feel in hand, just chambered in a cartridge that makes range days cheap and recoil almost nonexistent. That makes it a natural pick for new pistol owners, anyone training a family member, or the collector who wants the classic Walther lines in a plinking-friendly caliber.
What the PPK/S .22 Brings to the Table
The 3.3 inch barrel comes threaded from the factory, so adding a suppressor is as simple as picking up a 1/2×28 thread adapter (sold separately). The trigger is a traditional double action/single action setup, and rotating the manual safety down decocks the hammer, which is exactly how the originals worked. The DA pull is heavy in classic Walther fashion, but once you're in single action it breaks light and clean. Nice touches carry over from the centerfire guns too: a wave-cut top strap to knock down glare, rear slide serrations, an internal slide stop that keeps the sides snag-free, and a beavertail that protects your hand from slide bite.
Shooting the Walther PPK/S Rimfire
At 6.1 inches long and under an inch wide, this pistol is genuinely compact, and the 10-round magazine wears a finger rest baseplate that gives your pinky somewhere to live. Sights are fixed metal units with a windage-adjustable rear, and the checkered black grip panels keep the retro look intact. The PPK/S is the sport variant of the design with a slightly longer grip than the standard PPK, so most hands get a fuller purchase on it.
Whether it's your first handgun, a trainer that mirrors a carry pistol, or just the Bond gun you've always wanted in a shoot-it-often caliber, this one earns its spot in the safe.
Key Specifications
- Manufacturer: Walther Arms
- Model: PPK/S
- MPN: 5030300
- UPC: 723364200250
- Caliber: .22 LR
- Action: Semi-Auto, DA/SA
- Capacity: 10+1
- Barrel Length: 3.3 in, threaded (suppressor-ready with 1/2×28 adapter, sold separately)
- Overall Length: 6.1 in
- Height: 4.9 in
- Width: 0.98 in
- Sights: Fixed, windage-adjustable rear
- Safety: Manual thumb safety with decocker
- Slide: Rear serrations, wave-cut top strap
- Grips: Black checkered polymer
- Finish: Black
What’s Included
- Walther PPK/S .22 LR pistol
- 1 x 10-round magazine with finger rest baseplate
- Owner's manual
Frequently Asked Questions
Is the Walther PPK/S .22 LR the same size as the .380 version?
Yes, it's built as a 1-to-1 scale of the PPK/S in .380 ACP, so the dimensions, controls, and overall feel match the centerfire gun. That makes it a great low-cost trainer if you carry the .380, or just a faithful way to own the classic design. The big difference you'll notice is the near-zero recoil of .22 LR.
Can I put a suppressor on the PPK/S .22?
The barrel comes threaded from the factory, so it's suppressor-ready once you add a 1/2×28 thread adapter, which is sold separately. With subsonic .22 ammo and a can, this pistol is a genuinely quiet and fun setup. Just note the adapter does not ship in the box.
How does the trigger feel on the PPK/S 22?
It's a traditional DA/SA design. The double action pull is heavy at roughly 17.5 pounds, which is true to the original PPK character, while the single action pull is much lighter at around 6 pounds and breaks nice and crisp. Rotating the safety lever down safely decocks the hammer.
Is the Walther PPK/S .22 picky about ammo?
Like most rimfire semi-autos, it runs best on quality high-velocity .22 LR loads, especially during break-in. Give it a few hundred rounds of round-nose high-velocity ammo before settling on your go-to load. Keeping the pistol clean and lightly lubed also goes a long way with any .22 blowback design.



Reviews
There are no reviews yet.