Description
The .308 AR world is full of rifles that feel like a pile of parts, and then there's the Saint Victor V2. Springfield stretched the barrel out to a full 20 inches on this version, which squeezes noticeably more velocity out of .308 Winchester and 7.62 NATO loads compared to the common 16-inch guns. That extra reach matters when you're stretching steel past 600 yards or want a flatter trajectory for hunting open country. The continuous tapered chrome moly vanadium barrel wears a Melonite finish, runs a 1:10 twist that stabilizes heavier match bullets, and finishes with 5/8×24 threading behind a four-prong flash hider.
What Sets the Saint Victor V2 Apart
Springfield didn't cut corners where it counts. The upper and lower are forged 7075-T6 aluminum with a Type III hardcoat anodized finish, and the Accu-Tite tension system pulls the receivers together tight so there's no rattle between them. The enhanced .308 bolt carrier group uses a 9310 steel bolt that's HPT/MPI tested, built to handle the higher pressures this cartridge throws at an AR platform. A taper-pinned low-profile gas block keeps cycling consistent, and the flat-faced nickel boron trigger breaks cleaner than the mushy GI triggers most factory rifles ship with.
A .308 AR That's Ready Out of the Box
The furniture and controls are where the V2 really earns its keep. You get a Radian Raptor-LT ambidextrous charging handle, an ambi safety, a B5 Systems Enhanced SOPMOD stock, and a Strike Industries grip. The free-float aluminum handguard runs a full-length Picatinny top rail with plenty of M-LOK real estate and built-in QD sockets for slings. Low-profile flip-up sights come installed, so you can zero it and shoot the same day even before your optic shows up.
At roughly 8.1 pounds bare, it carries lighter than most 20-inch .308s, and the included 20-round Magpul PMAG Gen M3 means you're not hunting for magazines on day one. Whether you're building a do-it-all precision rig, a hog rifle, or just want serious punch at distance, this one covers a lot of ground for the money.
Key Specifications
- Manufacturer: Springfield Armory
- Model: Saint Victor V2
- MPN: STV920308B-V2-B5
- UPC: 706397975845
- Caliber: .308 Win / 7.62 NATO
- Action: Semi-Auto, Direct Impingement
- Barrel: 20" CMV, Continuous Taper, Melonite Finish
- Twist Rate: 1:10
- Muzzle Device: 4-Prong Flash Hider, 5/8×24 Threads
- Receivers: Forged 7075-T6 Aluminum, Type III Hardcoat Anodized
- Bolt Carrier Group: Enhanced .308 BCG, 9310 Steel Bolt, HPT/MPI Tested
- Trigger: Nickel Boron Coated Flat GI
- Charging Handle: Radian Raptor-LT Ambidextrous
- Stock / Grip: B5 Systems Enhanced SOPMOD / Strike Industries
- Capacity: 20+1 Rounds
- Weight: Approx. 8.1 lbs
What’s Included
- Springfield Saint Victor V2 .308 Win rifle
- 1 x 20-round Magpul PMAG Gen M3 magazine
- Low-profile flip-up front and rear sights (installed)
- Padded rifle case with exterior magazine pouches
- Owner's manual
Frequently Asked Questions
What advantage does the 20-inch barrel on the Saint Victor V2 give over the 16-inch version?
The longer barrel gets you meaningfully more muzzle velocity out of .308 Winchester, which translates to a flatter trajectory, more retained energy downrange, and better long-range performance overall. If your plans lean toward distance shooting or hunting in open terrain, the 20-inch tube is the way to go. The 16-inch models trade some of that reach for a handier package.
Can the Saint Victor V2 .308 shoot both .308 Win and 7.62 NATO ammo?
Yes, this rifle is set up to run both .308 Winchester and 7.62×51 NATO. That gives you flexibility to feed it affordable surplus-style NATO ammo for range days and step up to match or hunting loads when precision counts. The 1:10 twist rate handles a wide spread of bullet weights, including heavier match projectiles.
Does the Saint Victor V2 come with sights, or do I need to buy an optic right away?
It ships with low-profile flip-up front and rear sights already installed, so it's ready to zero and shoot straight out of the case. The full-length Picatinny top rail gives you plenty of room to add a scope or red dot later, and the flip-ups fold down to stay out of the way as backups.
What magazines does this Springfield .308 AR use?
It runs SR-25 pattern magazines and includes one 20-round Magpul PMAG Gen M3 from the factory. That's the most common .308 AR magazine pattern out there, so spares are easy to find and reasonably priced. Ten and twenty-five round PMAGs in the same pattern will work as well.




Reviews
There are no reviews yet.