Description
Every gas-operated AR lives and dies by its gas tube, and this pistol-length piece from Bootleg is the little part that makes your short-gas-system build run right. It routes gas back from the gas block to the bolt carrier group, giving you the pressure you need to cycle reliably in a pistol-length setup. Bootleg builds these out of stainless steel and finishes them in a bright silver, which is where the STS name comes from. It's a look that pairs nicely with stainless barrels and lighter-colored builds.
What the Bootleg Pistol Gas Tube STS Does for Your Build
Pistol-length gas systems run the shortest dwell time of the common lengths, so the tube itself is on the shorter side at roughly 6-5/8 inches. That short length is exactly what you want on pistol-length uppers and short-barrel configurations where the gas port sits close to the chamber. Stainless construction shrugs off the heat and fouling that come with a short gas system, and it resists corrosion far better than a bare steel tube.
Fitment and Install Notes for the Silver STS Tube
This is a standard mil-spec-diameter tube that works with AR-15, M4, and M16-pattern uppers, so it drops into most builds without any fuss. A roll pin is included to secure the tube to your gas block. Installation is straightforward if you've done gas tube work before, but a proper roll pin punch and a vise block make the job a lot cleaner. Just double-check that your gas block is set up for a pistol-length system before you order.
Bootleg operates out of Boise, Idaho and is a sister company to Primary Weapons Systems, so the same quality standards carry over. These tubes are made in the USA, and they're a smart pick whether you're finishing a fresh pistol build or swapping out a worn tube on an existing one.
Key Specifications
- Manufacturer: Bootleg Inc
- Manufacturer Part Number: BP-GTP-S
- UPC: 850008671074
- Product Type: Gas Tube
- Gas System Length: Pistol-Length
- Approximate Length: 6-5/8 in
- Material: Stainless Steel
- Finish: Silver (STS)
- Color: Silver
- Diameter: Mil-Spec
- Platform Fit: AR-15 / M4 / M16 Pattern
- Roll Pin: Included
- Country of Origin: Made in USA
What’s Included
- Bootleg pistol-length stainless gas tube (silver STS finish)
- Gas tube roll pin
Frequently Asked Questions
What length gas system does the Bootleg Pistol Gas Tube STS fit?
This tube is built specifically for pistol-length gas systems, which run the shortest dwell time of the common AR gas lengths. It measures roughly 6-5/8 inches, which lines up with the gas port placement on pistol-length uppers and short barrels. If your gas block is set up for a pistol-length system, this is the tube you want.
Does the silver STS tube come with a roll pin?
Yes, a roll pin is included to pin the tube to your gas block. You'll want a proper roll pin punch and a vise block to seat it cleanly, especially if the block runs an oversized pin hole. Beyond that, it's a straightforward install for anyone who's assembled an AR upper before.
What does STS mean and what is the tube made of?
STS refers to the silver stainless finish on the tube. The tube is machined from stainless steel, which stands up well to the heat and fouling that come with a short pistol-length gas system and resists corrosion much better than bare steel. The bright silver look also pairs nicely with stainless barrels and lighter builds.
Will this Bootleg gas tube work on a standard AR-15?
It uses standard mil-spec diameter and fits AR-15, M4, and M16-pattern uppers, so it drops into the vast majority of builds. The key thing to confirm is that your barrel and gas block are configured for a pistol-length gas system, not carbine or mid-length. Match the tube length to the gas system and you're good to go.






Reviews
There are no reviews yet.