$899.00
Out of stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Titanium suppressors usually ask you to trade toughness for weight savings. The Radical Defense LS-3Ti skips that compromise. It is printed as a single monolithic piece of Ti6Al4V alloy, which means no welds, no stacked baffles to work loose, and a structure that holds up to sustained full-auto fire. At 8.6 ounces and 7.5 inches long with a 1.6 inch diameter, it hangs off the end of a .30 caliber rifle without turning it into a nose-heavy chore to swing.
Anyone who has run a suppressed AR knows the downside of a tight can: extra gas in your face and a bolt cycling faster than it should. The LS-3Ti addresses that with a forward-venting design and assist ports that bleed pressure out the front instead of back through your action. The result is less felt blowback, a more controlled cyclic rate, and a cleaner shooting experience whether you are on a gas gun or a bolt rifle. Beyond sound reduction, the can also knocks down muzzle flash and thermal signature, and the exterior wears a non-reflective IR coating backed by high-temp Cerakote that shrugs off heat and hides well under night vision.
Radical Defense built this one around the industry-standard 1.375-24 HUB pattern, so you are not locked into a proprietary ecosystem. In the box you get the RD hub mount along with a KFM taper lock flash hider in 5/8×24, which gives you a secure, repeatable quick-detach setup for the most common .30 caliber muzzle thread from day one. Swap in other HUB mounts later if your collection grows.
For 300 Blackout builds, .308 bolt guns, or a do-it-all .30 cal can that will not flinch at hard use, the LS-3Ti earns its spot at the muzzle.
The LS-3Ti is rated for .30 caliber and smaller, which covers popular rounds like 300 Blackout, .308 Winchester, and 7.62 NATO. It also works fine on smaller bores like 5.56 if you want one can for multiple rifles. The included flash hider is threaded 5/8×24, the standard for most .30 caliber muzzles.
Yes. It uses the industry-standard 1.375-24 HUB pattern and ships with an RD hub mount plus a KFM taper lock flash hider. That means you can run the included quick-detach setup or swap in other HUB-pattern mounts and direct thread adapters down the road.
This is one of its strong suits. The forward-venting monolithic design with assist ports pushes gas out the front of the can rather than back into your action, which cuts felt blowback and keeps the cyclic rate under control on semi-auto and full-auto guns. It makes for a noticeably more pleasant experience on gas-operated rifles.
It can. Because the can is printed as one solid piece of Ti6Al4V alloy, there are no welds or baffle stacks to fail under heat and pressure, and Radical Defense rates it for sustained full-auto use. The high-temp Cerakote finish is built to take the abuse as well.
| UPC | 814034028363 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | LS3TI |
| Caliber/Gauge | .30 Caliber |
| Color | Black |
| Model | |
| Product Type | Suppressor |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.