Description
The Nordic Components MXT +2 is a no-frills way to get more capacity out of your 12 gauge without reinventing the wheel. This extension tube starts with quality materials: 6061 aircraft aluminum that's hard-coat anodized in matte black to resist corrosion while staying lightweight. You're not carrying around excess weight here, which matters when you're running drills or spending a day in the field.
What comes in the MXT +2 kit
The kit includes everything you need except the extension nut that actually attaches to your shotgun's magazine tube. You get the precision-machined aluminum tube, a tube cap, and a full-length spring designed to maintain consistent pressure across the added capacity. The spring is included at full length, so most installations will require trimming it to the right spec for your gun and ammunition combination. That's normal with this type of extension, and instructions guide you through it.
How the modular MXT system works
The MXT tubes feature matching thread pitch on both ends, which means they can be reversed if you need to adjust how a barrel clamp sits on your shotgun. There's also a relief groove built into the tube (on +2 through +9 sizes) that eliminates barrel clamp travel and keeps everything locked in the same spot after you take it apart and reassemble it. These aren't flashy features, but they're practical improvements that come from listening to what competitors and serious users actually need.
Real-world performance
This extension is built for 2.75 inch shells as the standard capacity rating, though it'll handle 3 inch shells too with some spring adjustment. The outside diameter is 1.060 inches, so it'll work with Nordic's compatible extension nuts and barrel clamps. The finish is matte black, so it blends with tactical and field setups without looking out of place. The kit won't do anything fancy, but users consistently report flawless feeding, solid fit and finish, and durability through hundreds of rounds.
Key Specifications
- Manufacturer: Nordic Components
- Model: MXT
- Manufacturer Part Number: MXT-TBS-12-2
- UPC: 816696021461
- Gauge: 12 Gauge
- Capacity Increase: +2 rounds
- Material: 6061 Aluminum
- Finish: Hard-Coat Anodized Matte Black
- Outside Diameter: 1.060 inches
- Tube Length (Approximate): 5.25 inches
- Shell Compatibility: 2.75 inch (3 inch with adjustment)
What’s Included
- Extension tube (aluminum, anodized black)
- Full-length magazine spring
- Tube end cap
Frequently Asked Questions
Do I need anything else to install the MXT +2 extension?
Yes, you'll need a Nordic Components MXT Extension Nut that matches your specific shotgun model. The extension tube won't attach without it. Nordic offers nuts for Remington, Mossberg, Benelli, Browning, Winchester, and other popular models. You may also want a barrel clamp for added stability depending on your setup.
Will I need to cut the spring?
In most cases, yes. The spring comes at full length, and you'll trim it to the right size for your shotgun and ammunition combination. Installation instructions walk you through this, and it usually takes about 10 minutes. Some guns with specific ammunition may not require cutting, but it's worth checking the fit during assembly.
What ammunition does the MXT +2 handle?
The kit is rated for 2.75 inch shells as the standard capacity. You can use 3 inch shells with adjustment to the spring, though you'll likely fit one fewer round. Capacity is based on star-crimped birdshot; slugs and buckshot are typically longer and will reduce how many rounds fit.
Is the MXT +2 compatible with all 12 gauge shotguns?
Not all, but the modular MXT system covers most popular 12 gauge models. Check Nordic's MXT Fit Guide or contact the manufacturer to confirm your specific shotgun. Some semi-automatic shotguns with certain gas system designs may not accept extensions, and a few older or less common models won't have a compatible nut available.



Reviews
There are no reviews yet.