Description
Radian took a full-size compensator's job and shrank it down to something you can carry every day. The Afterburner + Ramjet combo pairs a match-grade fluted barrel with a micro comp that measures only .47 inches long, and together they knock down felt recoil by up to 44% with 115 grain ammo. That means flatter shooting, faster follow-ups, and a front sight that stops dancing around, all without turning your compact into a race gun.
What Sets the Ramjet Barrel Apart
The Ramjet is cut-rifled and fluted, which trims weight and helps with heat, and it includes a gas sealing chamber plus a loaded chamber indicator so you can do a quick press check. It's machined from hardened 416R stainless steel and wears a bronze Radianite coating that shrugs off corrosion, muzzle blast erosion, and general wear. The Afterburner comp gets the same treatment, so the whole setup holds up to serious round counts and still looks sharp doing it.
Why the INTRA-LOK System Makes the Afterburner Different
This is where Radian did something clever. Instead of threading the barrel, the Afterburner uses a taper-lock design where a locking screw seats into a machined V-groove on the underside of the barrel. That perfectly times the comp every single time, no shims and no Loctite required. You slide the comp on, tighten the screw with the included bit, and you're done. When it's time to clean, the barrel drops right out of the slide.
Living With the Afterburner + Ramjet on a Glock 19
Installed on a G19, the combo bumps the slide length out to roughly a Glock 17, which means your existing G17 holsters will work. Folks running this setup consistently mention how compact it stays while delivering recoil control that rivals much larger comps. For a concealed carry Glock or a range gun you want to shoot flatter, it's a legitimately impressive package. Radian recommends running 124 grain or heavier 9mm for the best performance out of a compensated setup.
Key Specifications
- Manufacturer: Radian Weapons
- Manufacturer Part Number: R0835
- UPC: 810098420617
- Model: Glock 19 Gen3
- Caliber: 9mm
- Barrel Length: 4.42 in
- Barrel Material: Hardened 416R Stainless Steel
- Compensator Length: 0.47 in
- Finish: Bronze Radianite Coating
- Rifling: Cut-Rifled, Fluted
- Mounting System: INTRA-LOK Taper-Lock
- Recoil Reduction: Up to 44% with 115gr ammo
- Style: Non-Threaded
- Product Type: Barrel + Compensator Combo
What’s Included
- Ramjet match-grade barrel
- Afterburner micro compensator
- Tapered locking screw
- Torx bit
Frequently Asked Questions
Does the Afterburner + Ramjet fit a Glock 19 Gen3?
Yes, this specific combo is built for the Glock 19 Gen3 or compatible slides. It's engineered as a matched set, so the barrel and comp are designed to work together and shouldn't be mixed with other generation kits. Always confirm your pistol is a Gen3 before ordering.
Do I need a threaded barrel or timing to run the Afterburner comp?
No, and that's the whole point of the INTRA-LOK system. The Ramjet barrel is threadless, and the Afterburner locks on with a tapered screw that seats into a V-groove, timing itself perfectly every time. There are no shims or Loctite needed to keep it in place.
How much will the Afterburner + Ramjet change the size of my Glock 19?
The Afterburner adds only about .47 inches to the muzzle, which brings the overall slide length out to roughly that of a Glock 17. The practical upside is that your existing G17 holsters will typically accommodate the setup. It stays compact enough for everyday carry.
What ammo works best with this Radian combo?
Radian rates the recoil reduction at up to 44% using 115 grain ammunition. For the most consistent performance out of a compensated pistol, running 124 grain or heavier 9mm is generally recommended. It's worth testing a few loads to see what your gun likes best.







Reviews
There are no reviews yet.