$75.05
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The AK platform is a workhorse, but that classic 7.62×39 punch means the front end likes to jump around when you get on the trigger. The Hiperfire Hipercomp Gen2 goes after that problem directly. It's a high-performance muzzle compensator built for AK-pattern rifles, using strategically placed ports that redirect gas to push back against recoil and keep the muzzle settled. Hiperfire developed this design through side-by-side live-fire testing, and the payoff is a flatter-shooting rifle that lets you break shots quicker and stay on target.
This is the second-generation version, refined over the original for better recoil management. It's compact and lightweight at roughly 3.2 ounces with a .95-inch diameter, so it won't throw off your rifle's balance or leave you with a clunky front end. The black finish keeps it low-key and matches just about any AK build. Everything is made in the USA, which is a nice touch on a caliber that usually attracts imported hardware.
The Hipercomp Gen2 is cut for the standard M14x1 metric left-hand thread pattern found on most AK-47 and AKM rifles chambered in 7.62×39. This is not an AR-15 device, so make sure your barrel wears those 14×1 LH threads before ordering. A crush washer comes in the box to help you index and time the compensator to the position you want, and installation is straightforward with a proper armorer's wrench.
Where this piece earns its keep is on rapid strings. Cutting muzzle rise on a 7.62×39 rifle means your sights come back to point of aim faster, which translates to tighter groups when you're shooting quick and more control during drills. If you've been running a bare thread or a basic slant brake and want a real upgrade in how your AK handles, the Hipercomp Gen2 is a smart move.
It's threaded M14x1 metric left-hand, which is the standard pattern on most AK-47 and AKM rifles chambered in 7.62×39. Before ordering, confirm your barrel wears those 14×1 LH threads. This is an AK-specific device and is not made for AR-15 rifles chambered in 7.62×39.
A crush washer is included in the box, which lets you index and time the compensator to your preferred position as you torque it down. You'll want a proper armorer's wrench to finish the job. Beyond that, it's a straightforward install for most folks.
It uses ported channels that redirect propellant gas to counter muzzle rise and felt recoil. On a 7.62×39 rifle, that means the muzzle stays flatter and your sights return to target faster between shots. Hiperfire validated the design through comparative live-fire testing.
Yes, it's manufactured in the United States. That's a nice bonus on the AK platform, where a lot of muzzle hardware is imported. You're getting American machining on a design that's been range-proven.
| UPC | 859177004591 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | HPC762AK |
| Caliber/Gauge | 7.62 x 39mm |
| Color | Black |
| Product Type | Compensator |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.