Description
When a nick, holster wear, or a scratch leaves bare steel showing through, Kleen-Bore Black Magic is the kind of touch-up solution that earns its keep. It's a cold bluing formula that was previously kept behind the gunsmith bench, and it works by chemically reacting with the iron in the steel to lay down a dark, protective layer right where the original finish gave out. No tanks, no torches, no 290-degree salt baths. Just a small bottle, a clean surface, and a few minutes at the workbench.
What Black Magic Does Well
The whole reason this stuff has a following is the color. A lot of cold blues leave bare spots looking bright blue against an aged blue-black gun, but Black Magic runs genuinely dark, which is why so many people say it blends better than the alternatives they've tried. It's also the finish plenty of major firearms makers use to touch up guns right before they leave the factory. For small refinishing jobs, screw heads, trigger guards, or a worn muzzle crown, it gets the job done without drama.
Getting the Best Results from Your Bluing
Cold blue lives and dies by prep. The metal has to be spotless, so degrease with acetone or a dedicated cleaner and try not to touch the bare steel with your fingers afterward. Warming the part slightly with a hair dryer helps the reaction take. Rub the solution in for about 30 seconds, then rinse in water and dry, and repeat coats until the color matches. A quick pass with 0000 steel wool between coats evens things out. Follow the included instructions, since leaving it on too long can flash surface rust rather than a clean blue.
Why Keep a Bottle on the Bench
At 2 oz, this bottle covers a lot of touch-ups and stores easily in a range bag or on the shop shelf. It ships with a child-resistant cap and clear directions. Think of cold blue as a patch rather than a full refinish, it protects exposed steel from rust and knocks down that shiny bare spot so your gun looks like itself again. Made in the USA by a name that's been in the cleaning game for decades.
Key Specifications
- Manufacturer: Kleen-Bore
- Model: Black Magic
- Manufacturer Part Number: GB2
- UPC: 026249003244
- Product Type: Cold Bluing Solution (Liquid)
- Volume: 2 oz (60 ml)
- Packaging: Bottle with child-resistant cap
- Application: Surface steel touch-ups and small refinishing
- Heat Required: No, applies at room temperature
- Country of Origin: Made in USA
What’s Included
- One 2 oz (60 ml) bottle of Kleen-Bore Black Magic cold bluing solution
- Child-resistant cap
- Printed application instructions
Frequently Asked Questions
How do I use Kleen-Bore Black Magic for a touch-up?
Start with clean, degreased metal, acetone works well, and avoid touching the bare spot with your fingers afterward. Rub the solution onto the area for about 30 seconds, then rinse it in water and dry. Apply additional coats until the color matches, and follow the included instructions closely since leaving it on too long can cause surface rust instead of a clean blue.
Does Black Magic really turn steel black rather than bright blue?
Yes, that's the whole draw. Many cold blues leave bare spots looking bright blue against an aged finish, but Black Magic runs noticeably darker, which is why people find it blends better with worn blue-black guns. It's the same finish a number of firearms makers use to touch up guns at the factory.
Will this hold up like a factory bluing job?
Cold blue reacts on the very surface of the steel, so think of it as a patch rather than a full refinish. It protects exposed metal from rust and knocks down that shiny bare spot, but it won't stand up to holster wear the way hot bluing does. For deep restoration on a whole gun, a professional hot blue is the better route.
What can I use the 2 oz bottle of Black Magic on?
It's meant for steel surfaces, so worn muzzles, scratches, screw heads, trigger guards, and small refinishing jobs are all fair game. The 2 oz size covers plenty of touch-ups and fits easily in a range bag or on the workbench. It won't work on aluminum or stainless the same way it does on carbon steel.




Reviews
There are no reviews yet.