$10.99
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
TekMat pretty much invented the printed gun cleaning mat, and the Ultra 20 for the Beretta 92 is their step up from the standard line. You get more real estate to work with, a thicker cushion under your parts, and a stitched edge that keeps things from fraying after years of use. It measures a generous 15 by 20 inches, which gives you enough room to lay out a fully field stripped 92 with the slide, barrel, recoil spring, and your brushes and cleaning tools without stacking everything on top of each other.
The headline here is the quarter inch of vulcanized rubber backing. That extra thickness does two jobs at once. It gives you a soft, cushioned feel so small pins and springs do not bounce and roll away, and it protects your bench or table from solvents, oils, and CLP that would otherwise soak right into the wood. The rubber grips the surface too, so the mat stays put instead of sliding around while you scrub.
The printed layout is more than decoration. It lays out a full parts diagram of the Beretta 92 along with a bit of history on the platform, so you can double check where each component goes during reassembly. The artwork is dye sublimated into the fibers rather than silkscreened on top, which means it holds up to repeated cleanings and will not fade, wipe off, or scratch away over time.
The top surface is a soft thermoplastic fiber that keeps your finish scratch free, and it is both oil and water resistant so spills wipe up easy. When you are done, it rolls up and tucks in with the rest of your cleaning kit. This one also ships with a small microfiber TekTowel, a handy little extra for wiping down parts as you go. Whether you run an M9, a 92FS, or one of the many 92 variants, this mat gives that pistol a dedicated home on your bench.
The mat measures 15 by 20 inches, giving you plenty of room to lay out a fully disassembled Beretta 92 with space left over for brushes, jags, and cleaning solvents. It is noticeably larger than TekMat's standard 11 by 17 mats, so parts do not end up piled on top of each other.
The Ultra line steps up with a quarter inch of vulcanized rubber padding compared to the eighth inch on the standard mats, plus a premium stitched edge for extra durability. That thicker cushion gives you a softer surface and better protection for both your firearm and your workbench.
No. TekMat uses dye-sublimation printing that heat transfers the ink directly into the fibers rather than silkscreening it on the surface. That process makes the diagram resistant to fading, scratching, and the solvents and oils you use during cleaning.
The parts diagram is specific to the Beretta 92 family, so it is most useful for owners of the 92, 92FS, and the M9. That said, the oversized surface works fine as a general bench mat for cleaning just about any handgun.
| UPC | 612409971265 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TEK-R20-BER92 |
| Length | 20" |
| Model | |
| Product Type | Mat |
| Shipping Weight | 0.575 |
You must be logged in to post a review.
Reviews
There are no reviews yet.